memory timing - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Overclocking and Modding
Click Here to Login
Closed Thread
Thread Tools Display Modes
Old 01-29-2006, 03:26 PM   #1 (permalink)
Ultra Techie
Join Date: Jan 2005
Posts: 591
Default memory timing

hi there...
will iv benn having some problems with my asus a8n sli premium beeps five times on start up and sometimes during use..after contacting tech support they asked me to run memtest86 which showed they asked me to make sure that the timing is correct in the bios..any idea where can i find that becouse i looked for memory in the bios and this is what i have
timing mode: (auto)
memory clock :400 mhz
case#latency: 2.5
min ras active time(tras):8t
ras to cas delay:3t
row prechange time:3t
row cycle time:11t
row refresh cycle time :14t
read to write time:4t
write tecovery time:3t
1t/2t memory timing :2t
i check the corsair site and these are the timing
so are my timings right?

zenyora is offline  
Old 01-29-2006, 05:42 PM   #2 (permalink)
True Techie
Join Date: Dec 2004
Location: USA
Posts: 162
Send a message via AIM to Nissanspecv04

yes your timings are correct.

Nissanspecv04 is offline  
Old 01-29-2006, 05:44 PM   #3 (permalink)
Ultra Techie
Join Date: Jan 2005
Posts: 591

will i just got this email from asus:
"The problem you are having is more than likely going to be power related, any time you get beep codes that do not conform to any of the known it is almost always caused by power, please try a PSU that is capable of putting out at least 28 amps on the +3.3 voltage rail, at least 35 amps on the +5 voltage rail and a minimum of 18-20 on the +12 voltage rail, these are the board minimum requirements and if your PSu is below these specs it will need to ! be replaved"
how can i check that?
mu psu is
Antec TRUEPOWERII TPII-550 ATX12V 550W Power Supply 115/230 V UL, TUV, CB, FCC CLASS B, CUL
zenyora is offline  
Old 01-29-2006, 05:52 PM   #4 (permalink)
Monster Techie
Join Date: Sep 2005
Location: N/A
Posts: 1,486

Your PSU has more than enough amps on the rails to power your board.
Vybuni is offline  
Old 01-29-2006, 05:55 PM   #5 (permalink)
Ultra Techie
Join Date: Jan 2005
Posts: 591

then i guess my mobo doesnt work right ....
zenyora is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are Off

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 05:56 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.