jet 7 2600+ - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Overclocking and Modding
Click Here to Login
Closed Thread
 
Thread Tools Display Modes
 
Old 01-21-2004, 04:29 PM   #1 (permalink)
Monster Techie
 
aj2003's Avatar
 
Join Date: Jan 2004
Posts: 1,094
Default jet 7 2600+

i got a new setup coolermaster jet 7

http://www.coolermaster.com/?LT=engl...st&p_class=111 (top 1)

with a xp2600+ tbred which ive overclocked to 200 x 11 trouble is my temps are 47-50 idle and 53 load for cpu and 40-43 for case, but im hearin off ppl down below 40. them temps are up on fans full speed aswell.

i on a msi KT6 Delta-LSR which has no northbridge fan so im gonna get a one for there should help.

i also got 2 system fans 1side 1 back

im gonna get sum of that arctic paste help but wont knock off 10c
and i doin summit wrong? or are they just doin summit no1 else nows bout :S :S :s
__________________

aj2003 is offline  
Old 01-21-2004, 04:39 PM   #2 (permalink)
Ultra Techie
 
Join Date: Dec 2003
Posts: 590
Send a message via AIM to Shrapnill
Default

You didnt use thermal compound?? Youd be surprised what it can do. Apply it (properly) and come back if its still an issue.
__________________

__________________
System specs? Lets just get down to it people:

My penis is bigger than yours.
Shrapnill is offline  
Old 01-21-2004, 05:00 PM   #3 (permalink)
Ultra Techie
 
Join Date: Oct 2003
Posts: 620
Default

If you need instructions on how to properly apply your arctic silver, visit their website; http://www.arcticsilver.com/instructions.htm
__________________

CPU - P4 2.4C, 800FSB W/HT - CONSERVATIVELY OC\'ED
MOBO - GIGABYTE GA-8KNXP 2.0 875P CHIPSET/DUAL BIOS VER. FE
RAM - 1GB (2X512) OCZ PC3200 REV 2, 400MHZ 2-3-3 6
VID CARD - ASUS RADEON 9600XT 128MB W/VIVO
FLOPPY - SAMSUNG 1.44M
HDD - MAXTOR 120GB 7200RPM ATA133 EIDE W/8MB BUFFER
DVD - LG GDR8162B 16X IDE DVD ROM
PSU - ENERMAX EG465P-VE FC 460 WATT
VANTEC VP4-C7040 AEROFLOW HS/FAN
5 X VANTEC STEALTH 80MM CASE FANS
Bleep is offline  
Old 01-21-2004, 05:22 PM   #4 (permalink)
Monster Techie
 
aj2003's Avatar
 
Join Date: Jan 2004
Posts: 1,094
Default

yea i did, well it was my 1st time doin it so mustnt be gud enough. was just what came with the cooler though i take it off and try again wit artic stuff in mornin, thanks
aj2003 is offline  
Old 01-24-2004, 12:02 PM   #5 (permalink)
Monster Techie
 
Join Date: Jan 2004
Posts: 1,124
Default

yes thats a very good cooler should be doing better than that.
You may want to lap the heatsink as well
__________________
Thermaltake Armor A90
Corsair HX1000W PS
i7 2600k / Cooler Master Hyper N 520
Asus P8Z68-V Pro / Gen 3
8 GIG Corsair Vengeance
eVGA GTX 570
SB Audigy2 Platinum
Kingston Hyper X120 SSD
WIN 7 - 64b
LG Blue Ray Super Multi Burrner
Logitech THX Z560
3x120mm - 1x200 mm case fans
Cappy is offline  
Old 01-25-2004, 06:29 AM   #6 (permalink)
Monster Techie
 
aj2003's Avatar
 
Join Date: Jan 2004
Posts: 1,094
Default

what u meat lap the heatsink?
aj2003 is offline  
Old 01-25-2004, 07:39 AM   #7 (permalink)
Monster Techie
 
Join Date: Jan 2004
Posts: 1,124
Default

Its a technique that removes highspots and imperfections on the bottom of the heatsink.So that your heatsink covers the entire CPU chip evenly.Creating a better heat dissipation area so that your CPU can get the maximum cooling benefit from the HeatSink.
How to Lap a Heatsink.You need to study on this,its not hard to do but make sure that you sand the heatsink level with equal pressure .You dont want to change the integrity of the heatsink so that it sets lopsided.Pay attention to how much material your removing from the Heatsink.You may have to adjust the locking mechanism of the heatsink retainer to compensate for the material removed .Study thouroghly..
Its really all comon sense .You can use a micrometer to measure the heatsink before then again after to see how much material you removed .Shim the locking mechanism to compensate.
Im using the CoolerMaster Aero 4 version blower .
Lowerd my cpu 10 degrees
And i did have to lap the heatsink .It had a highspot in the center
of the HeatSink so it took alot of lapping.When i was done i had to install shims at a thikness of 40 thousands under the locking springs(those silver arms that actually hold the heatsink) to compensate for the material removed.
__________________

__________________
Thermaltake Armor A90
Corsair HX1000W PS
i7 2600k / Cooler Master Hyper N 520
Asus P8Z68-V Pro / Gen 3
8 GIG Corsair Vengeance
eVGA GTX 570
SB Audigy2 Platinum
Kingston Hyper X120 SSD
WIN 7 - 64b
LG Blue Ray Super Multi Burrner
Logitech THX Z560
3x120mm - 1x200 mm case fans
Cappy is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are Off




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 02:13 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.