I7930@20X200 4ghz will i get higher? - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Overclocking and Modding
Click Here to Login
Closed Thread
 
Thread Tools Display Modes
 
Old 04-11-2010, 02:52 AM   #1 (permalink)
True Techie
 
Join Date: Feb 2010
Posts: 110
Default I7930@20X200 4ghz will i get higher?

temps from real temp range from 72-77 max
temps from hw monitor and E-Leet were the same and was about 3 degrees lower than realtemp. what can i change to go lower temps / higher clocks?


Mother Board ( E758-A1 )
Drivers (* 9.1.1.1025* )
Bios ( ? )
CPU ( i7-930 )
CPU Cooler ( H20 cpu and EK mobo full block )
Memory ( OCZ Gold OCZ3G1600LV6GK )
PSU ( Corsair 750w )
GPU ( XFX 5870 XXX )
Drivers ( 8.712 )
CPU Clock Ratio ( 20X )
CPU Host Frequency (Mhz) ( 200 )
CPU Uncore Frequency (Mhz) ( 17x )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 100 )
Memory Feature
Memory Control Setting ( Enabled )
Memory Frequency ( 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Parameters
tCL Setting ( 8 )
tRCD Setting ( 8 )
tRP Setting ( 8 )
tRAS Setting ( 24 )
tRFC Setting ( 74 )
Command Rate ( 1T )
Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.4 )
CPU VTT Voltage ( +300 )*
CPU PLL VCore ( 1.900 )
DIMM Voltage ( 1.625 )
DIMM DQ Vref ( +0 )
QPI PLL VCore ( 1.325 )*
IOH VCore ( 1.375 )
IOH/ICH I/O Voltage ( 1.625 )
ICH VCore ( 1.125 )
PWM Frequency ( 933 )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Disabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Logical Processor Setting
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Settings
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.8 GT/s )
__________________

__________________
EVGA E760 Classified BIOS S664
i7-930 @ 4.2ghz
Watercooled
6GB Mushkin Redline 998750 @2010mhz 8-8-7 24
EVGA GTX 480 SLI
Antec TPQ-1200w
Triple Vertex-2 Raid 0 FW1.1 / 640 WD Blacks Raid 0
750 WD Black
X-Fi Titanium Fatal1ty
Blu-ray
Astro Gaming A40 system
HAF932
Win7 x64
eagle5968 is offline  
Old 04-11-2010, 08:32 AM   #2 (permalink)
Lord Techie
 
Slaymate's Avatar
 
Join Date: Feb 2009
Location: Florida
Posts: 7,946
Default Re: I7930@20X200 4ghz will i get higher?

You shouldn't need 1.4v of VCore, 1.325v should be plently at 4GHz.

The CPU PLL VCore should be left at 1.8v, if any adjust is to be made try lowering it to 1.775v

You have the CPU Uncore Frequency set at 17X? This should be at 16X or Auto with your present settings.

I recommend setting your PCI-E Frequency to 101. If you have stability issues when you try to increase your OC more, then you should try increasing your PCI-E Frequency between 101 - 106.

HT or Hyper-Threading sounds cool and in the future it may prove to be useful. But at the present moment it's not really serving any useful purpose. You should be able to Disable HT which will reduce your Temps slightly and then increase your OC.

Overall I can't help but think your watercooling loop is setup improperly. Your Temps should be much cooler than my Air setup, but there not.
__________________

__________________
[SIGPIC][/SIGPIC]
Slaymate is offline  
Old 04-11-2010, 12:12 PM   #3 (permalink)
True Techie
 
Join Date: Feb 2010
Posts: 110
Default Re: I7930@20X200 4ghz will i get higher?

i was also thinking maybe i did not setup my watercooling right. not sure what it could be. could it be that the thermal paste application is not even thickness on the cpu? what about my loop order? right now i got it to: reservoir feeding pump to cpu then vreg to nb/sb then radiator back to reservoir.
temp of reservoir is 24 degrees celcius.
slay im gonna make those BIOS changes and see what happens
__________________
EVGA E760 Classified BIOS S664
i7-930 @ 4.2ghz
Watercooled
6GB Mushkin Redline 998750 @2010mhz 8-8-7 24
EVGA GTX 480 SLI
Antec TPQ-1200w
Triple Vertex-2 Raid 0 FW1.1 / 640 WD Blacks Raid 0
750 WD Black
X-Fi Titanium Fatal1ty
Blu-ray
Astro Gaming A40 system
HAF932
Win7 x64
eagle5968 is offline  
Old 04-11-2010, 12:30 PM   #4 (permalink)
Lord Techie
 
Slaymate's Avatar
 
Join Date: Feb 2009
Location: Florida
Posts: 7,946
Default Re: I7930@20X200 4ghz will i get higher?

With watercooling I would expect your CPU Load Temps to be in the low 60's. The application of thermal paste can cause your temp to jump up or down a few degrees depending on the amount and thickness but it shouldn't be causing your system to get that hot unless you have WAY to much applied. Make sure your waterblocks are attached tightly. Make sure you have no kinked lines and ALL the air bubbles are removed from the loop. Is your Radiator located in a well ventilated area, if it is in a tightly confined space you may be trying to cool it with Hot Air or it may just be fighting to get any air at all. You may need fans that move more air or if your fans are adjustable you may need to increase the rotation speed to Max. And you may have to many waterblocks in your loop, maybe Burn will show up and have a few ideas for you
__________________
[SIGPIC][/SIGPIC]
Slaymate is offline  
Old 04-11-2010, 02:39 PM   #5 (permalink)
True Techie
 
Join Date: Feb 2010
Posts: 110
Default Re: I7930@20X200 4ghz will i get higher?

i might have used too much paste. i applied paste in middle of cpu and tighten and checked for coverage. or is it better to evenly spread paste by hand? theres a screw on my radiator i think its the bleeder. gonna see if theres air in it.. i have a feser 360 rads with 3x 1600rpm slipstreams fancontoller at 100%
the loop consists of the cpu block, EK full board block (NB/SB and VREG) and dual bay reservoir.
how are my VREG temps? it maxed out at 71 celcius.
could it be my voltages are too high like you said? cuz before i was also at 20x200 4ghz and my temps were 60-68 but i failed linx at 7minutes so i upped the voltage to pass linx but got those higher temps of 72-77. gotta check my bleeder, lower the voltages and post again
__________________
EVGA E760 Classified BIOS S664
i7-930 @ 4.2ghz
Watercooled
6GB Mushkin Redline 998750 @2010mhz 8-8-7 24
EVGA GTX 480 SLI
Antec TPQ-1200w
Triple Vertex-2 Raid 0 FW1.1 / 640 WD Blacks Raid 0
750 WD Black
X-Fi Titanium Fatal1ty
Blu-ray
Astro Gaming A40 system
HAF932
Win7 x64
eagle5968 is offline  
Old 04-11-2010, 02:57 PM   #6 (permalink)
Lord Techie
 
Slaymate's Avatar
 
Join Date: Feb 2009
Location: Florida
Posts: 7,946
Default Re: I7930@20X200 4ghz will i get higher?

Until you get your temperatures down to where they should be, you may not be able to lower your VCore.

So long as your Vreg stays below 80C the system should be OK, but with it watercooled I would expect it to stay in the 60's also.
__________________
[SIGPIC][/SIGPIC]
Slaymate is offline  
Old 04-11-2010, 04:14 PM   #7 (permalink)
True Techie
 
Join Date: Feb 2010
Posts: 110
Default Re: I7930@20X200 4ghz will i get higher?

i changed some stuff around and temps went down. cpu max 71 and Vreg max at 64

Mother Board ( E758-A1 )
Drivers (* 9.1.1.1025* )
Bios ( ? )
CPU ( i7-930 )
CPU Cooler ( H20 cpu and EK mobo full block )
Memory ( OCZ Gold OCZ3G1600LV6GK )
PSU ( Corsair 750w )
GPU ( XFX 5870 XXX )
Drivers ( 8.712 )
CPU Clock Ratio ( 21X )
CPU Host Frequency (Mhz) ( 192 )
CPU Uncore Frequency (Mhz) ( 16x )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 101 )
Memory Feature
Memory Control Setting ( Enabled )
Memory Frequency ( 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Parameters
tCL Setting ( 8 )
tRCD Setting ( 8 )
tRP Setting ( 8 )
tRAS Setting ( 24 )
tRFC Setting ( 74 )
Command Rate (1T )
Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.325 )
CPU VTT Voltage ( +300 )*
CPU PLL VCore ( 1.8 )
DIMM Voltage ( 1.65 )
DIMM DQ Vref ( +0 )
QPI PLL VCore ( Auto )*
IOH VCore ( Auto )
IOH/ICH I/O Voltage ( Auto )
ICH VCore ( Auto )
PWM Frequency ( 800 )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Disabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Logical Processor Setting
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Settings
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.8 GT/s )
__________________
EVGA E760 Classified BIOS S664
i7-930 @ 4.2ghz
Watercooled
6GB Mushkin Redline 998750 @2010mhz 8-8-7 24
EVGA GTX 480 SLI
Antec TPQ-1200w
Triple Vertex-2 Raid 0 FW1.1 / 640 WD Blacks Raid 0
750 WD Black
X-Fi Titanium Fatal1ty
Blu-ray
Astro Gaming A40 system
HAF932
Win7 x64
eagle5968 is offline  
Old 04-11-2010, 04:39 PM   #8 (permalink)
True Techie
 
Join Date: Feb 2010
Posts: 110
Default Re: I7930@20X200 4ghz will i get higher?

ok i kept same settings as above and jus raised blk to 200 and passed about 11minutes of linx
__________________

__________________
EVGA E760 Classified BIOS S664
i7-930 @ 4.2ghz
Watercooled
6GB Mushkin Redline 998750 @2010mhz 8-8-7 24
EVGA GTX 480 SLI
Antec TPQ-1200w
Triple Vertex-2 Raid 0 FW1.1 / 640 WD Blacks Raid 0
750 WD Black
X-Fi Titanium Fatal1ty
Blu-ray
Astro Gaming A40 system
HAF932
Win7 x64
eagle5968 is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
4GHz Quad Core i5-570 Screenshots Osiris Monitors, Printers and Peripherals 5 08-08-2009 04:36 AM
Upcoming 32nm Intel Clarkdale CPU Hitting 4GHz Osiris New Technology and Products 37 08-05-2009 04:22 AM
graphics 3dmark should be higher? joowan Overclocking and Modding 4 11-13-2008 06:54 AM
Set Higher max FPS in CSS? braz PC Gaming 14 03-19-2008 09:36 PM
higher fsb and lower multiplier or lower fsb and higher multiplier? advancedgeek Overclocking and Modding 5 10-02-2007 10:26 AM



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 02:03 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.