icantflybfplane
In Runtime
- Messages
- 101
so just nicely getting a replacement mobo cause my other one died...i decided hey...lets be a moron and **** around with overclocking...soo..system specs: E6300 1.86GHz, ASUS P5NSLI motherboard, 3GB OCZ platnium 800mhz ram, XFX 8800GTX, 2x160GB WD HD setup in RAID0, OCZ Gamer Xtream 700w psu
So..Ill try to remember what i had everythin set too..so i went into the bios and changed the VCore to 1.5, RAM to 2.1 and FSB i cant remember but it overclocked itself to 1377 and timings on ram were 4-5-4-10 so i started the comp up with just the ram overclocked...that worked fine and everything was dandy... i restarted and then proceeded to increase the vcore voltage
the comp restarted fine and booted into windows and one core said 1.86 and the other 2.05...strange but in anycase charged on and did a 3Dmark test to see any improvements, and i did the first couple mins that it ran i seen a 15FPS increase but then it froze shortly after starting, so after seeing nothing on my computer was responding i hit the restart button and now its giving me a blank screen like it did when the first asus p5nsli mobo i had died
i pulled all the ram out and pulled the cmos battery and managed to get the bios get to the point of detecting the IDE's but it freezes there
after even more tinkering around i managed to get into the bios and reset everything back to the defaults..it detects the hds and everything so i restarted and after post is done it detects the raid array i have setup...now it just sits there with a flashing prompt up in the top left hand corner
i replaced all the ram its all detected but still gets stuck at the point at detecting raid....
Now is there anything i can do? reinstall windows with the raid drivers? or what bridge is responisble for handling the raid north or south i cant remember..any suggestions what to do...i'd hate to get a new mobo but i think i killed it
So..Ill try to remember what i had everythin set too..so i went into the bios and changed the VCore to 1.5, RAM to 2.1 and FSB i cant remember but it overclocked itself to 1377 and timings on ram were 4-5-4-10 so i started the comp up with just the ram overclocked...that worked fine and everything was dandy... i restarted and then proceeded to increase the vcore voltage
the comp restarted fine and booted into windows and one core said 1.86 and the other 2.05...strange but in anycase charged on and did a 3Dmark test to see any improvements, and i did the first couple mins that it ran i seen a 15FPS increase but then it froze shortly after starting, so after seeing nothing on my computer was responding i hit the restart button and now its giving me a blank screen like it did when the first asus p5nsli mobo i had died
i pulled all the ram out and pulled the cmos battery and managed to get the bios get to the point of detecting the IDE's but it freezes there
after even more tinkering around i managed to get into the bios and reset everything back to the defaults..it detects the hds and everything so i restarted and after post is done it detects the raid array i have setup...now it just sits there with a flashing prompt up in the top left hand corner
i replaced all the ram its all detected but still gets stuck at the point at detecting raid....
Now is there anything i can do? reinstall windows with the raid drivers? or what bridge is responisble for handling the raid north or south i cant remember..any suggestions what to do...i'd hate to get a new mobo but i think i killed it