How would I... (Overclocking, etc.)

[Abstract Hero]

I have Just finished my first rig (hardware wise) that i built for music recording and extremely light gaming. (I'm really a Xbox kinda guy I only play Half-Life 1&2 which run fine.) I would like to get everything running to full capacity now so i can get the most out of this low budget build. (I've only spent $300 on the entire computer ) How would i over clock and tune my pc or do i even want to?

I'm rockin':

Operating System
MS Windows XP Home 32-bit SP3
Installation Date: 31 March 2010, 12:10

CPU
AMD Sempron 3100+
Cores 1
Threads 1
Name AMD Sempron 3100+
Code Name Palermo
Package Socket 754
Technology 90nm
Specification AMD Sempron(tm) Processor 3100+
Family F
Extended family F
Model C
Extended model 2C
Stepping 2
Revision DH-E6
Instructions MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64
Bus speed 200.9 MHz
Rated Bus speed 803.7 MHz
Stock core speed 1800 MHz
Stock bus speed 200 MHz
Average Temperature 112 °F
Caches
L1 data cache size 64 KBytes
L1 instructions cache size 64 KBytes
L2 unified cache size 256 KBytes
Core 0
Core speed 1808.3 MHz
Multiplier x 9.0
Bus speed 200.9 MHz
Rated Bus speed 803.7 MHz
Temperature 112 °F
Thread 1
APIC ID 0

RAM
Memory
Type DDR
Size 1536 MBytes
Channels # Single
DRAM frequency 200.9 MHz
CAS# Latency (CL) 3 clocks
RAS# to CAS# delay (tRCD) 3 clocks
RAS# precharge (tRP) 3 clocks
Cycle time (tRAS) 8 clocks
Bank cycle time (tRС) 11 clocks
Command rate (CR) 1T
SPD
Number of SPD modules 2
Slot #1
Type DDR
Size 512 MBytes
Manufacturer Samsung
Max bandwidth PC3200 (200 MHz)
Part number M3 68L6423ETM-CCC
Serial number 420C0FD9
Week/year 48 / 04
SPD Ext. EPP
JEDEC #2
Frequency 200.0 MHz
CAS# latency 3.0
RAS# to CAS# 3
RAS# Precharge 3
tRAS 8
Voltage 2.500 V
JEDEC #1
Frequency 166.7 MHz
CAS# latency 2.5
RAS# to CAS# 3
RAS# Precharge 3
tRAS 7
Voltage 2.500 V
Slot #2
Type DDR
Size 1024 MBytes
Manufacturer Kingston
Max bandwidth PC3200 (200 MHz)
Part number K
Serial number 7216E42B
Week/year 24 / 09
SPD Ext. EPP
JEDEC #2
Frequency 200.0 MHz
CAS# latency 3.0
RAS# to CAS# 3
RAS# Precharge 3
tRAS 8
Voltage 2.500 V
JEDEC #1
Frequency 166.7 MHz
CAS# latency 2.5
RAS# to CAS# 3
RAS# Precharge 3
tRAS 7
Voltage 2.500 V

Motherboard
Manufacturer First International Computer, Inc.
Model K8MC51G
Version SYS-xxxxxx
Chipset vendor NVIDIA
Chipset model GeForce 6100
Chipset revision A2
Southbridge vendor NVIDIA
Southbridge model nForce 410/430 MCP
Southbridge revision A2
BIOS
Brand Phoenix Technologies, LTD
Version 6.00 PG
Date 11/11/2005

Graphics
Monitor
Name DELL E176FP on NVIDIA GeForce 6100
Current Resolution 1024x768 pixels
Work Resolution 1024x738 pixels
State enabled, primary, output devices support
Monitor Width 1024
Monitor Height 768
Monitor Bpp 32 bits per pixel
Monitor Frequency 60 Hz
Device \\.\DISPLAY1\Monitor0
nVidia video
GPU C51G
Device ID 10DE-0242
Revision A3
Subvendor FIC (1509)
Technology 90 nm
Release Date Nov 2005
DirectX Support 9.0c
DirectX Shader Model 3.0
OpenGL Support 2.0
GPU Clock 425 MHz
Memory Clock 333 MHz
Driver nv4_disp.dll (6.14.10.8133)
ForceWare version 81.33
ROPs 2
Shaders Vertex 2/Pixel 2
Memory Type System
Pixel Fillrate 0.8 GPixels/s
Texture Fillrate 0.8 GTexels/s

Hard Drives
ST3100011A
Manufacturer Seagate
Form Factor 3.5"
Interface ATA
Capacity 100GB
Real size 100,030,242,816 bytes
S.M.A.R.T
01 Read Error Rate 060 (051 worst) Data 0005EEA0D3
03 Spin-Up Time 099 (097) Data 0000000000
04 Start/Stop Count 094 (094) Data 00000019EF
05 Reallocated Sectors Count 100 (100) Data 0000000000
07 Seek Error Rate 090 (060) Data 003B52BEF3
09 Power-On Hours (POH) 078 (078) Data 0000004D34
0A Spin Retry Count 100 (100) Data 0000000000
0C Device Power Cycle Count 100 (100) Data 00000002F4
C2 Temperature 040 (048) Data 0000000028
C3 Hardware ECC Recovered 060 (051) Data 0005EEA0D3
C5 Current Pending Sector Count 100 (100) Data 0000000000
C6 Uncorrectable Sector Count 100 (100) Data 0000000000
C7 UltraDMA CRC Error Count 200 (199) Data 0000000001
C8 Write Error Rate / Multi-Zone Error Rate 100 (253) Data 0000000000
CA Data Address Mark errors 100 (253) Data 0000000000
Temperature 105 °F
Temperature range ok (less than 122 °F)
Status Good
Partition 0
Partition ID Disk #0, Partition #0
Disk Letter C:
File System NTFS
Volume Serial Number 00802C04
Size 88.39GB
Used Space 19.62GB (23%)
Free Space 68.78GB (77%)
Partition 1
Partition ID Disk #0, Partition #1
Disk Letter D:
File System FAT32
Volume Serial Number 423B2BDF
Size 4.75GB
Used Space 3.02GB (64%)
Free Space 1.73GB (36%)

Optical Drives
LITE-ON DVDRW SHW-1635S
Media Type CD-ROM
Name LITE-ON DVDRW SHW-1635S
Availability Running/Full Power
Capabilities Random Access, Supports Removable Media
Config Manager Error Code Device is working properly.
Config Manager User Config FALSE
Drive E:
Media Loaded FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 3
SCSI Target Id 0
Status OK
TSSTcorp CDW/DVD TS-H492C
Media Type CD-ROM
Name TSSTcorp CDW/DVD TS-H492C
Availability Running/Full Power
Capabilities Random Access, Supports Removable Media
Config Manager Error Code Device is working properly.
Config Manager User Config FALSE
Drive F:
Media Loaded FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 3
SCSI Target Id 1
Status OK

I know it's a lot but I felt i might as well let it all out now to save questions later.

Anyhelp would be greatly appreciated.

 

[baron5]

Overclocking is done through the bios, Although that system and cpu are so old i'm not sure how much you'll get out of it. Your best of looking at some amd socket 754/939 overclocking guides but i honestly wouldn't worry about it, your board is generic and won't go far. But if you want to have a look here.
AMD Sempron 3100+ Overclocking (page 4) - X-bit labs