help a modding noob

Status
Not open for further replies.

disgruntled~lla

Solid State Member
Messages
7
ok,

I recently purchased a new case,with 2 LED fans,and 6 LED lights on the front,and an LCD temp. on the front.the case can be seen here-http://www.newegg.com/app/ViewProductDesc.asp?description=11-144-001&depa=1

so I transferred everything,and my problem is with some of the LCD hook ups, there are 3 connector wires with 2 holes on each that connet to a part on the motherboard,and there are two other wires with 1 hole on each end that possibly connects to the same spot,there are 9 pins where this part is located,so when i hooked them all up nad the power gos on,the 2 LCD fans light up,but the 6 LCD on the front cover dont light up,the wires coming from all the lights are labeled "power sw" "reset sw" "h.d.d. Led" "+LED" "-Led"...my problem is that i dont know where these connect to,any help will do,thanks
 
ok im not sure if i understand ur post but .... u plug the cables from the case to ur mobo loook at the mobo manual to find the correct pins to insert the headers on
 
Status
Not open for further replies.
Back
Top Bottom