j12
Daemon Poster
- Messages
- 1,133
My E6300 is at 3.12ghz and I want to reach 3.4ghz. I am using a zalman cnps 9700. The cpu is at 38 degrees centigrade. I am using a gigabyte ds3 motherboard. To overclock my cpu i have not increased any voltages, only increased the fsb. I also want to overclock my ram a little bit. My timings according to cpuz are.
Frequency: 450mhz
FSB DRAM: 1:1
CAS#Latency: 5.0
RAS# to CAS# Delay: 7
RAS# Precharge: 7
Cycle time (Tras): 19
Bank cycle timer (trc): n/a
Command rate:2T
Frequency: 450mhz
FSB DRAM: 1:1
CAS#Latency: 5.0
RAS# to CAS# Delay: 7
RAS# Precharge: 7
Cycle time (Tras): 19
Bank cycle timer (trc): n/a
Command rate:2T