General guidlines for over 30% OC??
I posted this on XS, and not surprisingly I didn't get a response. Seems like people don't like to share their OCing secrets.
What are the general guidelines for an over 30% OC? Such as over 3.8g or over 3.9g for the 965 users. Pardon some of the no0bish questions, I have just never found the answers to some of these.
-Should the NB and HT speeds match?
-You multiply the FSB by the HT and/or NB mult to find the speeds, correct?
-Recommended min and max voltages for HT and NB? 1.35?
-What is HT link width? I have 8 bit, 16bit and auto.. What should this be set to?
-Should I have to mess with the SB voltage? I'm thinking not.
-General settings for NB and HT? ~1g less than the CPU speed, right?
That should be it.. Thanx in advance.
PII 940 @ 3.8g | Gigabyte DS4H | OCZ Reaper 1066 | HD 4870 1G | Ultra X3 1000w | Antec 900 | 1/2" CPU/GPU LIQUID LOOP | OCZ SSD | Swiftech + XSPC
<---- If You enjoyed my ramblings, or if I've helped you, Check me... :D