I just got my stuff the other day and was looking for suggestions / settings from anyone who has had experience with a similar setup to mine. My goal is to hit 4gzh... I know it's a pretty good jump but gonna try for it... I haven't put anything together as of yet so I'm going to run on stock to get everything installed then jump into the nasty stuff...
I have the following to work with;
Processor
Intel Core 2 Duo E7200 Wolfdale 2.53GHz LGA 775 65W Dual-Core Processor Model BX80571E7200 - Retail
Thermal Compound
Tuniq TX-2 Thermal Compound - Retail
CPU Cooler
XIGMATEK HDT-S1283 120mm Rifle CPU Cooler - Retail
Memory
G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL4D-4GBPI - Retail
MotherBoard
DFI LANPARTY DK X38-T2R LGA 775 Intel X38 ATX Intel Motherboard - Retail
PSU
XIGMATEK MC NRP-MC751 750W ATX12V Ver.2.2 / EPS12V Ver. 2.92 Power Supply 100 - 240 V cUL, CE, TUV, FCC - Retail
Case
Antec Nine Hundred Black Steel ATX Mid Tower Computer Case - Retail
Thanks in advance...
I have the following to work with;
Processor
Intel Core 2 Duo E7200 Wolfdale 2.53GHz LGA 775 65W Dual-Core Processor Model BX80571E7200 - Retail
Thermal Compound
Tuniq TX-2 Thermal Compound - Retail
CPU Cooler
XIGMATEK HDT-S1283 120mm Rifle CPU Cooler - Retail
Memory
G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL4D-4GBPI - Retail
MotherBoard
DFI LANPARTY DK X38-T2R LGA 775 Intel X38 ATX Intel Motherboard - Retail
PSU
XIGMATEK MC NRP-MC751 750W ATX12V Ver.2.2 / EPS12V Ver. 2.92 Power Supply 100 - 240 V cUL, CE, TUV, FCC - Retail
Case
Antec Nine Hundred Black Steel ATX Mid Tower Computer Case - Retail
Thanks in advance...