So I got a new pc and decided to go with the Coolermaster k350 as it was on offer- I got a fairly good psu and the k350 for £50. I put my new system together and routed all the cables through the holes on the motherboard tray. The cpu power wasn't quite long anogh but I though one cable not being routed behing the tray can't be too bad and in the end my whole build actually looked quite neat. However when I tried to put the right side panel on I was dismayed to find that not even a a sata cable could be put behind the motherboard tray- there is only about half a cm of clearance. This not only begs the question as to why Coolermaster bothered making the cutouts if they knew there is not really enough room to put cables behind the tray, but also how could I solve this problem. At the moment I am considering not putting the side panel on but there must be a way of modding the case to allow cables (other than the front panel ones) to be passed through the back by increasing clearance. Any ideas?