ok im building a case soon (from scratch i mean) with aluminum probly...i am building the case around watercooling along with efficient aircooling to keep the parts and overall case cool. my parts are in my sig but i was planning on dangerden parts mostly and a weapon core radiator. i dont really have any idea on how i want to build it or what layout i want to use. i was thinking of mouting the radiator on the front of the case where hardrives usually go so that it still pulls cool air into the water. then i was going to put the pump behind that and have it push to the rad imeadiatly. then from the rad to the cpu(rbx block) to each video card seperatly>res>pump over again. this is with the upside down atx idea i was going to use.then i would use 2 120mm fans in front on rad, 1 in back or maybe 2 for exhaust, a 120mm blowhole or 2 and at least 1 side 120 maybe 2. that would be like 5-8 fans total depending on configuration...would that be loud? i would probly use these fans for the rad:
and these for the rest:
(color may change but that fan) with those fans would the pc be very loud? i would also be using this pump the d5 or maybe the d4 http://www.dangerdenstore.com/produc...&cat=23&page=1
and these water blocks:
rbx cpu: http://www.dangerdenstore.com/produc...&cat=19&page=1
sli video card kit: http://www.dangerdenstore.com/produc...&cat=67&page=1
im new to both building cases and watercooling so sorry if i sound like a noob i just want a good watercooling system so i can oc some and keep my stuff cool, but not be too loud.