build opinions

Status
Not open for further replies.

arnold023

Baseband Member
Messages
53
ready to buy this line-up tomarrow, just needed assurance that everything is stable and compatible...

SAMSUNG 990DF-Black 19" CRT Monitor 0.20mm Dot Pitch D-Sub-

NZXT NEMESIS Black Aluminum ATX Mid Tower Computer Case 400W Power Supply

Thermaltake Silent Purepower W0013RU ATX 480W Power Supply 100 - 240V

Seagate Barracuda 7200.8 ST3200826AS 200GB 7200 RPM 8M Cache Serial ATA150 Hard Drive - OEM -

DFI LP UT nF4 SLI-D Socket 939 NVIDIA nForce4 SLI ATX AMD Motherboard

CORSAIR XMS 1GB (2 x 512MB) 184-Pin DDR SDRAM Unbuffered DDR 400 (PC 3200) Dual Channel Kit System Memory -

AMD Athlon 64 3500+ Processor (Venice) Socket 939 Retail -

eVGA 256-P2-N376-AX Geforce 6800GT 256MB 256-bit GDDR3 PCI-Express x16 Video Card -
 
Don't forget arctic silver or windows if needed. Looks good. You could get ocz ram instead of corsair xms.

Roger
 
ok build but if your not going to oc then a less expensive motherboard might be appropriate but that mobo ownz for ocing and most other things
 
i decided not to go with an SLI so what is the recomended mobo that would be less expensive or same price as the DFI i had. I thought about asus but they are rather expensive
what about these four...
1. GIGABYTE GA-K8NF-9 Socket 939 NVIDIA nForce4 ATX AMD Motherboard -$91.50

2. MSI K8N Neo4-F Socket 939 NVIDIA nForce4 ATX AMD Motherboard - $89.00

3. ASUS A8V-E Deluxe Socket 939 VIA K8T890 ATX AMD Motherboard - $115.00

4. DFI nF4-DAGF Socket 939 NVIDIA nForce4 ATX AMD Motherboard - $89.00
 
DFI makes a nForce4 mobo that is not SLI. I think it is called Ultra-D.
 
wawawawa wait.

Is the PSU ATX 2.0 ?

You need a 2.0 psu to run the 6800s.

If your psu is with the case, its likely that it isnt a 2.0.
 
Status
Not open for further replies.
Back
Top Bottom