ATITool 0.26/Graphics card Question.
Just ran ATITool and the default clocks for my card were
I ran the max core, and max memory setting, and i got the core to around 700mhz before i started getting yellow lines on the graphic, and i got the memory to around 870mhz before i started getting yellow lines/dots on my graphic.
So i set the 2d core as 540 core clock, and the memory to 850mhz.
I set the 3d low power core to 600mhz, and the memory to 850mhz.
I set the 3d perf. core to 680mhz, and the memory to 850mhz.
the temp readings were around 79-81 when i did the "find max core, and find max memory".
Ill run orthos overnight and see if anything unusual happens, but orthos does not test my graphics card right?