Techist - Tech Forum

Techist - Tech Forum (http://www.techist.com/forums/)
-   Overclocking and Modding (http://www.techist.com/forums/f10/)
-   -   Athlon XP: measuring resistance (http://www.techist.com/forums/f10/athlon-xp-measuring-resistance-59748/)

TheMajor 07-25-2005 07:38 AM

Athlon XP: measuring resistance
 
Hi,

I tried to unlock my Athlon XP with silver laquer.
Unfortunately it didn't work quite well. My multiplier dropped from 10.5x (default) to 5.5x and depending on wich multiplier setting I configure in my BIOS it is sometimes at 5.0 or 6.5 (CPU-Z readings), even though I configured a different value in my BIOS. Most multiplier values result in a non-booting system.

How do I properly measure the resistance of the bridges using a multimeter and wich values should I get?

I searched google but I still don't get it.

timmer 07-25-2005 02:50 PM

whats unlocking ur cpu with silver laquer?

PoisonPorkchop 07-25-2005 02:54 PM

from the looks of his response i dont think youll get too much help here. I might be wrong tho

DJ-CHRIS 07-25-2005 04:22 PM

Just put the points on the multimeter on the two cpu pin's

Hopefully, yours does autorange

TheMajor 07-25-2005 05:18 PM

Well. I googled some more and I know the resistance has to be below 1 Ohm. My values were below 1 Ohm but I wasn't sure what points to measure. I don't know what pins you mean either, Chris.
Anyways, I removed the silver laquer and it's back at it's default multiplier (10.5x) I will maybe try to unlock it again friday, but the contacts are worn off due to my several unlocking attemps, so I don't know if it will work.

DJ-CHRIS 07-25-2005 05:23 PM

The two pin's you bridged with laquer, or did you bridge the top points?

TheMajor 07-25-2005 05:29 PM

The 2 points I bridges didn't have a lot of resistance. What are those top points?

DJ-CHRIS 07-25-2005 05:55 PM

I dont know, just whatever you have bridged

I have never unlocked XP's before

TheMajor 07-25-2005 05:58 PM

I think I'll just get a new CPU if I don't manage to unlock it friday. I need a new CPU anyways, so I can use this CPU for my old motherboard.

pc_boy 07-25-2005 08:32 PM

what cpu are you getting? ;)


All times are GMT -5. The time now is 04:11 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.