Anyone Else have a Asus p5e x38?

[Drizzt]

Just wondering if anyone else has a Asus P5E X38. I would like to see what you use in bios when OC'ing.. I am unfamiliar with some of the things in it.

Ex/They refer to the multiplier as ratio i think.

 

[gurusan]

these are the settings i use for 470fsb on my e6750....may be of some help. I am using the Rampage bios though so some of the settings might be different from yours. Also just so you know, the P5E overvolts the ram by about .06-.08v

Ai Overclock Tuner : Manual
OC From CPU Level Up : AUTO
CPU Ratio Control : Manual
- Ratio CMOS Setting : 8
FSB Frequency : 470
FSB Strap to North Bridge : 333
PCI-E Frequency: 115
DRAM Frequency: 1128
DRAM Command Rate : 2N
DRAM CLK Skew on Channel A : Normal
DRAM CLK Skew on Channel B : Normal
DRAM Timing Control: Manual
CAS# Latency : 5
RAS# to CAS# Delay : 5
RAS# Precharge : 5
RAS# ActivateTime : 15
RAS# to RAS# Delay : Auto
Row Refresh Cycle Time : Auto
Write Recovery Time : Auto
Read to Precharge Time : Auto

Read to Write Delay (S/D) : Auto
Write to Read Delay (S) : Auto
Write to Read Delay (D) : Auto
Read to Read Delay (S) : Auto
Read to Read Delay (D) : Auto
Write to Write Delay (S) : Auto
Write to Write Delay (D) : Auto

Write to PRE Delay : Auto
Read to PRE Delay : Auto
PRE to PRE Delay : Auto
ALL PRE to ACT Delay : Auto
ALL PRE to REF Delay : Auto

DRAM Static Read Control: Disabled
Ai Clock Twister : Stronger
Transaction Booster : Manual

Common Performance Level [7]

Pull-In of CHA PH1 Disabled
Pull-In of CHA PH2 Disabled
Pull-In of CHB PH1 Disabled
Pull-In of CHB PH2 Disabled

CPU Voltage : 1.4125
CPU PLL Voltage : 1.52
North Bridge Voltage : 1.55
DRAM Voltage : 2.04
FSB Termination Voltage : 1.46
South Bridge Voltage : 1.1
Loadline Calibration : ENABLED
CPU GTL Reference : .65x
North Bridge GTL Reference : .63x
DDR2 Channel A REF Voltage : Auto
DDR2 Channel B REF Voltage : AUTO
DDR2 Controller REF Voltage : DDR_REF
SB 1.5V Voltage : 1.5

CPU Spread Spectrum : Disabled
PCIE Spread Spectrum : Disabled

 

[Drizzt]

Ah... the bios that i have is fine right? I don't like flashing the bios did it once and it scared me to pieces

Thanks alot though! Should be a big help!