Techist - Tech Forum

Techist - Tech Forum (http://www.techist.com/forums/)
-   Overclocking and Modding (http://www.techist.com/forums/f10/)
-   -   AMD Overclocking Thread. (http://www.techist.com/forums/f10/amd-overclocking-thread-162493/)

Ste 12-24-2007 09:55 PM

AMD Overclocking Thread.
 
This thread is intended to keep a record of all members AMD single, Dual or Quad core overclocks..

The format will be as follows, Please try to keep in line with it.

Processor:
Stepping:
Revision:
VID:
Final Clock:
Final Vcore:

Power supply:
MotherBoard:
RAM:
Timmings:
RAM to FSB:
Final RAM Voltage:

Stress testing program:
Hour of Stability:
Max Load Temparture:
Reason for Stress Test End:

Heatsink:
Thermal Paste:
Lapped Heatsink:
Lapped Processor:

Core temp AND CPUZ Screen Shot:


Voltage Information Picture:

If for any reason you cannot obtain a picture of your CMOS voltages, please type them in manually.

Please post your own Results in a similar if not exact format.
Please do not post any overclock other than YOUR OWN!.
If someone wants to be recognized, then they must post their own information.
No Suicide Runs, Post the settings that you run for the longest period of time.
No Software Overclocks, e.g. clockgen or AsusAiTuner, overclocks must be set through the CMOS Setup.
----------------------------------------------------------------
Highest Clock reguardless of CPU type will be listed first.
Result Format: Name, Mothrboard, CPU, Clock

Results:
-----------------------------------------------------------------
Apokalipse, MSI K9A2 Platinum, 6000+, 3.435 GHz
nagasama, EVGA 590 SLI, 5000+ Black Edition, 3.364 GHz
v8killaz, Asus M2N32-SLI DELUXE, X2 5400+, 3.255 GHz
CntdwnToExtn, Gigabyte MA790GP-DS4H 790GX, X2 5000+ BE, 3.207 GHz
lancec2c30, Abit KN8-SLI, 3800+ Toledo, 3.1 GHz
Peter.Cort, MSI K9A Platinum, 4000+ Brisbane, 3 GHz
spikoman69, Biostar T-force 7025A, 4000+ Brisbane, 2.95 GHz
LeftEyeBlind, Biostar 7025-M2, 3600+ Brisbane, 2.92 GHz
bkolk, epox 9nda3+, 3700+ san diego, 2.65 GHz
greenday77, MSI K9N Neo-F V3, 4000+, 2.625 GHz
Shumway, Asrock939 Dual-VSTA, 3000+ venice, 2.601 GHz
hmammen, DFI lanparty nf4 ultra-D sli mod, Opteron 165, 2.45 GHz


Overclocking Guides and Information
-------------------------------------
AMD Overclocking Guide - EXTREME Overclocking Forums
Overclocking Guide - Page 1 - introduction
AMD Overclocking Guide :: TweakTown

hmammen 12-24-2007 10:16 PM

Re: Official AMD Overclocking Thread.
 
Processor: Opteron 165
Stepping: CCB1E
Revision: 0606VPMW
VID: 1.20
Final Clock: 2.45ghz (273x9.0)
Final Vcore: 1.31

Power supply: Antec truepower 2.0 550watt
MotherBoard: DFI lanparty nf4 ultra-D sli mod
RAM: G skill 2x1gb ddr400
Timmings: 2.5-3-3-6
RAM to FSB: 1/1
Final RAM Voltage: 2.5volts
CPU voltage: 1.3volts
LDT voltage: 1.4volts
Chipset voltage: 1.70volts
DRAM voltage: 3.00volts

Stress testing program: super pi
Hour of Stability: always stable:)
Max Load Temparture: 60c
Reason for Stress Test End: had to stop sometime...

Heatsink: modified opteron copper HS
Thermal Paste: MX-2
Lapped Heatsink: no
Lapped Processor: Yes

http://img167.imageshack.us/img167/9933/waefwfvx0.png

needs sticky.

Ste 12-24-2007 11:08 PM

Re: Official AMD Overclocking Thread.
 
hmammen: Please list the rest of your voltages.

Like north Bridge, MCH, South bridge or any thing else your motherboard has options for..

hmammen 12-24-2007 11:23 PM

Re: Official AMD Overclocking Thread.
 
ok i listed more volts...thats all that i know of though.

Ste 12-24-2007 11:38 PM

Re: Official AMD Overclocking Thread.
 
Ok, good. We are doing this so we can help others new to overclocking. :)

Ethereal_Dragon 12-24-2007 11:59 PM

Re: Official AMD Overclocking Thread.
 
are we going to have this be a 'comment free' thread similar to the case gallery, just for OC bragging rights?

Ste 12-25-2007 12:01 AM

Re: Official AMD Overclocking Thread.
 
Nah, you can comment all you like.

Peter.Cort 12-25-2007 03:09 PM

Re: Official AMD Overclocking Thread.
 
Processor: X2 4000+ Brisbane
Stepping: 1
Revision: BH-G1
VID: 1.3
Final Clock: 277x10.5 = 2.9ghz
Final Vcore: 1.30 w/ 10% increase = 1.43

Power supply: Corsair 520hx
MotherBoard: MSI K9A Platinum
RAM: Corsair XMS2 DDR2-800
Timmings: 4-4-4-12
RAM to FSB: 1:1
Final RAM Voltage: Stock

Stress testing program: Prime95, Everest Ultimate, COD4, BF2 3dmark06
Hour of Stability: Many
Max Load Temparture: 23C Core0, 28C Core1
Reason for Stress Test End: Got Bored

Heatsink: AFP-64
Thermal Paste: MX-2
Lapped Heatsink: No
Lapped Processor: No

Core temp AND CPUZ Screen Shot: --


Voltage Information Picture: --


--All overclocking done while listening to Dispatch and chewing on zip-ties.

and yes the racing stripes are helping me :D


http://img340.imageshack.us/img340/4323/29gx4.jpg
i got my brisbane up to 2.9 (third place is all for me!!)


that and my voltage is 1.35 + 13.3%

LeftEyeBlind 12-25-2007 03:40 PM

Re: Official AMD Overclocking Thread.
 
Processor: AMD X2 3600+ (Brisbane Core)
Stepping: 1
Revision: BH-G1
Final Clock: 2.92
Final Vcore: 1.49

Power supply: CoolerMaster eXtreme Power Duo 600w
MotherBoard: Biostar 7025-M2
RAM: 2x512MB Patriot Extreme Performance + 1x512MB AmpX High Performance Ram
Timmings: 4-4-4-11:14
RAM to FSB: 1/8
Final RAM Voltage: 2.2V

Stress testing program: Orthos
Hour of Stability: 6+
Max Load Temparture: Unknown (Can't find a program to measure temps correctly in windows, as its a Brisbane core)
Reason for Stress Test End: I felt it had gone on long enough.

Heatsink: Stock
Thermal Paste: Stock
Lapped Heatsink: No
Lapped Processor: No

CPUZ Screen Shot:

http://img299.imageshack.us/img299/3...1180hw0.th.jpg

Invisible 12-25-2007 08:43 PM

Re: Official AMD Overclocking Thread.
 
i think it should be like 3dmark thread
but that would take up pages galore i suppose


All times are GMT -5. The time now is 07:18 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.