AMD overclocking help! - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Overclocking and Modding
Click Here to Login
Closed Thread
Thread Tools Display Modes
Old 11-13-2005, 04:48 PM   #1 (permalink)
Junior Techie
Join Date: Nov 2005
Posts: 49
Default AMD overclocking help!

Hello all! I have an AMD Duron 900. I have been able to overclock this slightly to 945 mhz (or so) by increasing the fsb in the bios. Anything past that freezes the computer at boot and I have to reset the bios and set it back. However it works fine at that speed.
After that, I decided to use the graphite method to unlock changing the frequency multipliyer thinking I might be able to get a better combination. However, once I did this, I can't overclock at all! it runs fine at 900 mhz but anything over that causes a freeze at boot. I put graphite over each of the L2 caches points. I also put the pencil graphite over the L7 cache leads. Is doing this supposed to unlock the options of frequency multiplier and voltage control in the bios? Because it didn't.

Can somebody point me onto what I did wrong? = P

Eleaf is offline  
Old 11-13-2005, 07:59 PM   #2 (permalink)
Junior Techie
Join Date: Nov 2005
Posts: 49

Ahhh!! Somebody help here! = S
Eleaf is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are Off

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 04:27 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.