adding a window

Status
Not open for further replies.

slowcomp

In Runtime
Messages
103
i want to cut out a piece of my side panel for a window and put some black lexan in the cut how would i go about putting the lexan in
 
I've seen some use rivets and super glue and look nice or a type of stripping that the windows sits in...
 
I have done many windows to count. I have used rivets, screws, glue, adn tape. Two sided tape is by far the best and easiest to work with in my opinion. Any hardware store and places like Autozone will sell two sided tape. I like the grey 3m 5lbs. rated tape. All you have to do is cut out the window then clean up the edges or you can use trim to smooth them out also (available for about 5 bucks at Autozone). Once finished stick the window to back of the case door with the two sided tape and enjoy.

Just like my good buddy Bill Owens shows us here:
http://www.wizdforums.co.uk/showthread.php?t=305
He adds a little more but you can clearly see how he mounts the window. Good Luck!!!
 
Status
Not open for further replies.
Back
Top Bottom