9V straight out of psu for fan? - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Overclocking and Modding
Click Here to Login
Closed Thread
 
Thread Tools Display Modes
 
Old 06-17-2005, 08:49 AM   #1 (permalink)
Banned
 
Join Date: Jan 2004
Location: A system that rotates chaotically while simulations indicate irregular and unconventional behaviour.
Posts: 477
Question 9V straight out of psu for fan?

I think quite common trick is(was) to stick a fan into +5V and +12V making it run at 7V, but has anyone tried putting one in 3.3V and 12V =8.7V? ...and yes I know there are these fan controllers etc. so don't preach me about them. thank you.
__________________

LoTeX is offline  
Old 06-17-2005, 09:57 AM   #2 (permalink)
Super Techie
 
Join Date: Feb 2004
Posts: 431
Default

I'm not too sure if that would work..it sound like it should.. but always check properly first. Also the 3.3 V Rail would have to come from the 20/24Pin Motherboard Connector as there is only 3.3V Rail there, not on any standard 4 pin molex connectors. You could always solder a wire onto the back of the board where the 3.3v rail pin in under the 20/24 pin connector.
__________________
Sig removed due to size. Please read the rules before adding your compliant sig. SigSanta
MasterJason is offline  
Closed Thread

« Memory | pipelines »
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are Off




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 09:09 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.