Hi,
Just got my 2500m and I couldn't wait, so I put the FSB to 200 with multiplier 11! Running prime95 torture test, no problem!
I opened the mbm and asus probe to monitor the temperature... after about 10 mins, the alarm start to sound from the asus probe. +5V was fluctuating, so I ignored, and carry on, well after few minutes, all the temperature became N/A on both mbm and asus probe!!!
Asus probe was showing CPU fan, Chasis Fan under threshold(I set it at 600rpm) +12V and +5V was fluctuating! So I got scared I am going to burned the CPU and shut the power off! During all of these time, prime 95 was running!
Restart and set the multiplier to 10, but it won't boot, so I shut it off and just set it back to stock!
What might be the cause of this??? I suspect it might be the power supply, but than it is a 400W(I hope the shop didn't lie to me 2 years ago...) hahaha
Please help...
Just got my 2500m and I couldn't wait, so I put the FSB to 200 with multiplier 11! Running prime95 torture test, no problem!
I opened the mbm and asus probe to monitor the temperature... after about 10 mins, the alarm start to sound from the asus probe. +5V was fluctuating, so I ignored, and carry on, well after few minutes, all the temperature became N/A on both mbm and asus probe!!!
Asus probe was showing CPU fan, Chasis Fan under threshold(I set it at 600rpm) +12V and +5V was fluctuating! So I got scared I am going to burned the CPU and shut the power off! During all of these time, prime 95 was running!
Restart and set the multiplier to 10, but it won't boot, so I shut it off and just set it back to stock!
What might be the cause of this??? I suspect it might be the power supply, but than it is a 400W(I hope the shop didn't lie to me 2 years ago...) hahaha
Please help...