hello
i decided to add some memory so i purchased two sticks of crucial memory 1024mb (2x512) and after i nstalled them in my computer my computer would not boot up , but when i took them out my computer runs good again. here is
the new memory i am trying to install :
Part Number: CT2KIT6464Z40B
Module Size: 1GB kit (512MBx2)
Package: 184-pin DIMM
Feature: DDR PC3200
Configuration: 64Meg x 64
DIMM Type: UNBUFFERED
Error Checking: NON-ECC
Speed: DDR400
Voltage: 2.6V
Memory Timings: CL=3
Specs: DDR PC3200 • CL=3 • UNBUFFERED • NON-ECC • DDR400 • 2.6V • 64Meg x 64
heres the memory thats already installed:
Field Value
Memory Module Properties
Module Name Legacy Electronics 88H5HDL0-1UDG
Serial Number None
Module Size 512 MB (2 ranks, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC3200 (200 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings
@ 200 MHz 3.0-3-3-8 (CL-RCD-RP-RAS)
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
@ 133 MHz 2.0-2-2-6 (CL-RCD-RP-RAS)
Memory Module Features
Early RAS# Precharge Not Supported
Auto-Precharge Not Supported
Precharge All Not Supported
Write1/Read Burst Not Supported
Buffered Address/Control Inputs Not Supported
Registered Address/Control Inputs Not Supported
On-Card PLL (Clock) Not Supported
Buffered DQMB Inputs Not Supported
Registered DQMB Inputs Not Supported
Differential Clock Input Supported
Redundant Row Address Not Supported
is this supposed to work?
oh! i ran the scan on crucial website and they reccomended the above memory.
i have p4c800e-deluxe MB
intel P4 3.0
xp home sp2
thanks
harley
Aspire X-Superalien 500W
Asus P4c800E Deluxe
Intel P-4 800 3.0G 1mb cache
Legacy Electronics pc3200 DDR , 2x512mb
2x WD 80GB Sata 150 7200rpm 8M
Ati Radeon 9800XT 256MB
Audigy 2ZS
Windows XP , home sp2
i decided to add some memory so i purchased two sticks of crucial memory 1024mb (2x512) and after i nstalled them in my computer my computer would not boot up , but when i took them out my computer runs good again. here is
the new memory i am trying to install :
Part Number: CT2KIT6464Z40B
Module Size: 1GB kit (512MBx2)
Package: 184-pin DIMM
Feature: DDR PC3200
Configuration: 64Meg x 64
DIMM Type: UNBUFFERED
Error Checking: NON-ECC
Speed: DDR400
Voltage: 2.6V
Memory Timings: CL=3
Specs: DDR PC3200 • CL=3 • UNBUFFERED • NON-ECC • DDR400 • 2.6V • 64Meg x 64
heres the memory thats already installed:
Field Value
Memory Module Properties
Module Name Legacy Electronics 88H5HDL0-1UDG
Serial Number None
Module Size 512 MB (2 ranks, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC3200 (200 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings
@ 200 MHz 3.0-3-3-8 (CL-RCD-RP-RAS)
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
@ 133 MHz 2.0-2-2-6 (CL-RCD-RP-RAS)
Memory Module Features
Early RAS# Precharge Not Supported
Auto-Precharge Not Supported
Precharge All Not Supported
Write1/Read Burst Not Supported
Buffered Address/Control Inputs Not Supported
Registered Address/Control Inputs Not Supported
On-Card PLL (Clock) Not Supported
Buffered DQMB Inputs Not Supported
Registered DQMB Inputs Not Supported
Differential Clock Input Supported
Redundant Row Address Not Supported
is this supposed to work?
oh! i ran the scan on crucial website and they reccomended the above memory.
i have p4c800e-deluxe MB
intel P4 3.0
xp home sp2
thanks
harley
Aspire X-Superalien 500W
Asus P4c800E Deluxe
Intel P-4 800 3.0G 1mb cache
Legacy Electronics pc3200 DDR , 2x512mb
2x WD 80GB Sata 150 7200rpm 8M
Ati Radeon 9800XT 256MB
Audigy 2ZS
Windows XP , home sp2