N Norcent Banned Messages 1,829 Oct 19, 2006 #1 I used the bios and got the frequency up to 203MHz but if i go any higher there is just a blank screen. I had to clear the bios and was wondering how i can overclock higher without that happening? Could i use a program?
I used the bios and got the frequency up to 203MHz but if i go any higher there is just a blank screen. I had to clear the bios and was wondering how i can overclock higher without that happening? Could i use a program?
Shumway Fully Optimized Messages 2,729 Location London - Ontario - Canada Oct 19, 2006 #2 Before doing anything else you should read up on the fundamental's of oc'ing
L Lord AnthraX Fully Optimized Messages 2,992 Oct 19, 2006 #3 Post your BIOS settings and I'l help you out. ex: FSB: Multi: Dram Voltage: ETC:
NosBoost300 I poop on the rug Messages 10,220 Location Bellflower, CA Oct 20, 2006 #5 don't forget to lower your hyper transport to 4
OP OP N Norcent Banned Messages 1,829 Oct 20, 2006 #7 I moved it up to 225Mhz the temp is 114ºF idle and i was wondering if thats good? I am using the stock fan. thats 2.47 Ghz it says.
I moved it up to 225Mhz the temp is 114ºF idle and i was wondering if thats good? I am using the stock fan. thats 2.47 Ghz it says.
NosBoost300 I poop on the rug Messages 10,220 Location Bellflower, CA Oct 20, 2006 #8 i'm not sure if thats good.. i 'm used to looking at a celcius scale
boomstick666 Daemon Poster Messages 743 Oct 20, 2006 #10 If it's 45c full load then its fine. if it's the idle temp then its' no good. try Prime95 CPU test for 8-10 hours and if you get no error + no over heating (below 50c load temp), then you are good.
If it's 45c full load then its fine. if it's the idle temp then its' no good. try Prime95 CPU test for 8-10 hours and if you get no error + no over heating (below 50c load temp), then you are good.