Well, i think either my mobo or CPU is fried or something. When i press the power button, everything turns on then off, LEDs light up, fans move, etc. So i started unpluggin things and trying different RAM sticks and a different PSU and it did the same thing. My mobo is a DFI Lanparty UT nf4 Ultra-D (well specs in my sig.) and for those who have a DFI, u'll probalby understand this. The LED down at the bottom of the mobo is on, but the RAM Power LED only shows when i press the power button or unplug then plug in my PSU. But when i press the power button, all four red LEDs on the mobo light up which in the manual says its "System Start-Up". All i have hooked up is the RAM, CPU, PSU, mobo. I've tried 3 different sticks of RAM and one other PSU. I have no other CPU to test with or another s939 mobo to test either. I've also tried clear CMOS and tryin Safeboot.
Comp is at most 2 months old and only started OCin about a month ago and i did Prime95 and check temps and everything, lowered the HTT multiplier so it didnt go above 1000mhz, had a RAM divider and my RAM ran at 200Mhz.
Anyone have any suggestions, ideas, etc i really need help
Comp is at most 2 months old and only started OCin about a month ago and i did Prime95 and check temps and everything, lowered the HTT multiplier so it didnt go above 1000mhz, had a RAM divider and my RAM ran at 200Mhz.
Anyone have any suggestions, ideas, etc i really need help