Hey all!
I've recently custom built myself a computer.
On completion of the build I connected everything, double checked everything was okay and powered it up.
The problem: Nothing happened, the power came on, the fans came on, the lights lit up, the DVD drive made a noise and all the cards appeared to be working okay.
BUT nothing appears on the monitor (which I have tested and is working). The only thing that appears is the No Signal message.
I have checked the RAM and changed the modules around but to no avail.
From what I've read I have seen that the PSU is a big culprit of cold boots but I'm really no expert and I'd like someone's advice.
The specs are:
AMD Athlon X2 4200+
DFI LanParty n4 Motherboard
1GB PC3200 RAM
GeForce 7900GT 256mb
Maxtor SATA 300GB
DVD-RW
PSU 230V (420W OUTPUT)
Thanks in advance, your help is much much appreciated!
I've recently custom built myself a computer.
On completion of the build I connected everything, double checked everything was okay and powered it up.
The problem: Nothing happened, the power came on, the fans came on, the lights lit up, the DVD drive made a noise and all the cards appeared to be working okay.
BUT nothing appears on the monitor (which I have tested and is working). The only thing that appears is the No Signal message.
I have checked the RAM and changed the modules around but to no avail.
From what I've read I have seen that the PSU is a big culprit of cold boots but I'm really no expert and I'd like someone's advice.
The specs are:
AMD Athlon X2 4200+
DFI LanParty n4 Motherboard
1GB PC3200 RAM
GeForce 7900GT 256mb
Maxtor SATA 300GB
DVD-RW
PSU 230V (420W OUTPUT)
Thanks in advance, your help is much much appreciated!