Build for an Aussie - Check before I order!

Status
Not open for further replies.
personally I'd get the smartpower. the Truepower is better, but you won't notice the difference. the quality is still there in the smartpower.

just don't get a low budget PSU from a generic company. those are the ones with an absence of quality.
 
Ok, I will do that then, which brings my price back under $1500. Thanks champ!

Last question.
Gecube X1900XT 256MB GDDR3 Dual -Link VIVO+AVIVO Edition
or
Leadtek PX7900GT-TDH 256MB DDR3 PCIe
 
yes, Gecube are a good brand.

voltmodding: it does make a big difference.
you just decide whether it's worth the risk.

you could simply do the conductive pen mod, which isn't very risky.
if you do the resistor mods, it is a fair bit more risky. of course that depends on your soldering skills.

the conductive pen mod allows you to get up to 1.55V, which should allow you to get past 650MHZ pretty easily.

but note that you really need extra cooling if you want to get past 1.4V

before I voltmodded, I could overclock to 560MHZ
after I voltmodded, I could overclock to 750MHZ
 
Status
Not open for further replies.
Back
Top Bottom