bmxfreakrider
G33K P0W3R!!!!
- Messages
- 2,068
I have an AOpen AX3L mobo, its a 366 cele, but its a socket 370, and i got a socket 370 p3 1.0ghz, would that work? the mobo is jumperless and has some awsome overclocking controls.
another question, i got a stick of 512, and two sticks of 64 in here, but windows says(and bios) it only got like 370, i think the 512 is bad, or the mobo dont support it, so i would like to know where i can find memtest, or someting similar so i can test it. also the mobo i think supports 512, but just with the 512, it shows up as like 280 or somethin
last question, is it true that a hdd on the same ide ribbion as a cd-rw actually decreases the preformance of that hdd?
just a few questions cause i just built this as an upgrade from the one on my sig(also i got this cele 366 oced to like 450, with some massive cooling from the p3, 80mm, 2in high, 2 in wide, 2 in long, but ran fine with a laptop style fan, bout 2cm high, 1.5x1.5 inches)
------------------
System Information
------------------
Time of this report: 8/10/2006, 19:16:16
Machine name: ***************
Operating System: Microsoft Windows XP Professional (5.1, Build 2600) Service Pack 1 (2600.xpsp1.020828-1920)
Language: English (Regional Setting: English)
System Manufacturer: AWARD_
System Model: AWRDACPI
BIOS: AWARD - 42302e31
Processor: Intel Celeron, MMX, ~458MHz
Memory: 384MB RAM
Page File: 128MB used, 794MB available
---------------
Display Devices
---------------
Card name: 3dfx Voodoo3
Manufacturer: 3dfx Interactive, Inc.
Chip type: 3dfx Voodoo 3
DAC type: 3dfx Internal DAC
Device ID: Enum\PCI\VEN_121A&DEV_0005&SUBSYS_0036121A&REV_01
Display Memory: 16.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: 3dfxvs.dll
Driver Version: 5.00.2489.0028 (English)
DDI Version: 7
Driver Attributes: Final Retail
Driver Date/Size: 8/17/2001 14:55:58, 689216 bytes
Card name: NVIDIA GeForce4 MX 4000
Manufacturer: NVIDIA
Chip type: GeForce4 MX 4000
DAC type: Integrated RAMDAC
Device ID: Enum\PCI\VEN_10DE&DEV_0185&SUBSYS_00000000&REV_C1
Display Memory: 128.0 MB
Current Mode: 1280x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.10.9131 (English)
DDI Version: Unknown
Driver Attributes: Final Retail
Driver Date/Size: 6/1/2006 17:22:00, 4529408 bytes
edit: one more question, got a maj prob, my new hdd is running at 122F!!! that aint good, ne sugestions?
Your hard disk is a WDC WD800JB-00JJC0 with firmware 05.01C05.
The average temperature for this hard disk is 37C (MIN=27C MAX=48C) and yours is 50C.
another question, i got a stick of 512, and two sticks of 64 in here, but windows says(and bios) it only got like 370, i think the 512 is bad, or the mobo dont support it, so i would like to know where i can find memtest, or someting similar so i can test it. also the mobo i think supports 512, but just with the 512, it shows up as like 280 or somethin
last question, is it true that a hdd on the same ide ribbion as a cd-rw actually decreases the preformance of that hdd?
just a few questions cause i just built this as an upgrade from the one on my sig(also i got this cele 366 oced to like 450, with some massive cooling from the p3, 80mm, 2in high, 2 in wide, 2 in long, but ran fine with a laptop style fan, bout 2cm high, 1.5x1.5 inches)
------------------
System Information
------------------
Time of this report: 8/10/2006, 19:16:16
Machine name: ***************
Operating System: Microsoft Windows XP Professional (5.1, Build 2600) Service Pack 1 (2600.xpsp1.020828-1920)
Language: English (Regional Setting: English)
System Manufacturer: AWARD_
System Model: AWRDACPI
BIOS: AWARD - 42302e31
Processor: Intel Celeron, MMX, ~458MHz
Memory: 384MB RAM
Page File: 128MB used, 794MB available
---------------
Display Devices
---------------
Card name: 3dfx Voodoo3
Manufacturer: 3dfx Interactive, Inc.
Chip type: 3dfx Voodoo 3
DAC type: 3dfx Internal DAC
Device ID: Enum\PCI\VEN_121A&DEV_0005&SUBSYS_0036121A&REV_01
Display Memory: 16.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: 3dfxvs.dll
Driver Version: 5.00.2489.0028 (English)
DDI Version: 7
Driver Attributes: Final Retail
Driver Date/Size: 8/17/2001 14:55:58, 689216 bytes
Card name: NVIDIA GeForce4 MX 4000
Manufacturer: NVIDIA
Chip type: GeForce4 MX 4000
DAC type: Integrated RAMDAC
Device ID: Enum\PCI\VEN_10DE&DEV_0185&SUBSYS_00000000&REV_C1
Display Memory: 128.0 MB
Current Mode: 1280x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.10.9131 (English)
DDI Version: Unknown
Driver Attributes: Final Retail
Driver Date/Size: 6/1/2006 17:22:00, 4529408 bytes
edit: one more question, got a maj prob, my new hdd is running at 122F!!! that aint good, ne sugestions?
Your hard disk is a WDC WD800JB-00JJC0 with firmware 05.01C05.
The average temperature for this hard disk is 37C (MIN=27C MAX=48C) and yours is 50C.