Air flow set up

[Ov3RBliK1]

Intake:
- 80mm in front near HDDs
- 80mm on side panel

Exhaust:
- 2 x 80mm in rear


Hopefully will look into new cooling solutions soon (water?) because it gets really hot in there. A little while ago I just took off the whole side panel and put a window fan there blowing into. It worked good.

 

[Lonewolf5460]

Hmmmm. Well check out the SViking case by thermaltake. This thing is TOUGH! I've Drilled about 50+ times into the case, Use a hole saw and rattled the **** out of it, rattled it some more using a metal file, hit front door with a rubber mallet, dropped 11 times (I count these things) and many many more horrible things...like spilling sulfuric acid on it and its still standing...pretty dang sturdy if you ask me.

dont come near my comuter man ****

 

[Deathawk]

I have a laptop.

But on my desktop, my computer's side panel is open, and I have a 92mm for exaust in the back :\

 

[Lonewolf5460]

92 mm havent really seen cases that support 92mm for exaust

 

[Von Theron]

Im building a new rig soon and im thinking about putting two 92mm vantec tornadoes for intake and 2 92mm tornadoes as exhaust in the back. No fan controller either lol. As for now i got a total of 4 80mm fans all around my case.

 

[b1gapl]

INTAKE:
1x140mm in front
1x120mm on side

EXHAUST:
1x120mm in rear
PSU has 1x120mm

I think it's pretty well balanced...

 

[AMDSCOrPiO]

Mine is way off balance but seems to work but also very loud.

2x80mm at the front (intake)
80mm at the side (intake)
80mm at the back (exhaust)
psu dual 80mm fans (exhaust)