need h20-cooling friendly case w/ area underneath

Status
Not open for further replies.

R1C0CH3T

Daemon Poster
Messages
871
i saw a case once where the motherboard was positioned on the very top of the case, and underneath, seperated from the rest of the electronics, is a area where a pump and radiator go, sucking air in through the case and then out the back bottom. i need a case like this with a window. any links?
 
Chances are good that person added a section onto his case. A bunch of watercoolers/chillers do that.
 
wtf are you talkign about?

Thats almost only used for phase change or chilled w/c loops

ALmost never for plain old w/c

its alot easier to mount a radiator than youd think.


Richochet, i own the aurora and i have my rad mounted on the back and i utilize the built in holes with rubber grommets to run my tubing into the case. Works great! :D
 
jseber1982 said:
can always get the good ol CM Stacker

I agree. The original stacker is one of the best H20 friendly cases. Danger Den has an acrylic case coming out where the mobo lays flat with everything underneath it. Or you can go with a mountain mods.




EDIT: Here are the links

http://www.mountainmods.com/product_info.php?cPath=21_32&products_id=77
I own this exact case and it's the best case I have seen but pricy and worth every penny.

Stacker
2194fn6.jpg

black ice 2 mounts nicely without cutting.

Danger Den cube
21949cn.jpg

Only downside is there isn't opticals since it's a LAN case and most people just run games off of ISO's at LAN's.
 
Status
Not open for further replies.
Back
Top Bottom