ok i just tried again, i put 1:1 ram divider in, and i still couldnt get pass, that 160mhz fsb, i also lowewrd the voltages to the lowest possible, and is on like1.5v at the mo, but in cpuz and pc wizzard, there still say 1.6v, any ideas?
after OC, i put the voltage down to the lows it would allow, whch presume is stock, 1.525v, it kept spiking and in cpuz showed it at 1.6v, but i cant get it anymore than 162 fsb, i ran prime95 when i got it to 163 but i crashed after a few hours, it cant be a heating prob, as the voltage is so low?
i know its not the ram, cos when i did a 1:1 ram divider i still couldnt get passed the 162fsb, the ram is now on 200mhz, so thats fine, i dont think the temps are accurate, at the mo pc wizzard, and speedfan both say about 20'C, whcich seems really cool, but i spose i do have it on the lowest votage?
ok, ok, i lowered the voltage, cos i used the automatic OCing thing and in cpuz it said the voltage was on 1.6v and the fsb at 160, so i used the manule OC and relised i could get the 160fsb, at the lower voltage, which is good right?
by chipset voltage, is that the vcore, cos i did that all the way to 1.7v and it had no effect