Advice on a Budget Computer

[Infinite]

I'm trying to build the most inexpensive computer for graphics/websites/minor video stuff. This is what I have come up with so far. Any advice on whether this would be fine?

Processor: AMD Sempron 2600+ Processor S754 Palermo 1.6GHZ 128KB L2 Cache 90NM OEM & Foxconn HSF Bundle

Motherboard: ASUS K8N-VM mATX S754 GeForce 6100 DDR PCI-E16 SATA2 Video Sound LAN Motherboard

RAM (2x):
Samsung PC3200 512MB DDR400 184PIN DIMM OEM

Harddrive: Seagate Barracuda 7200.9 120GB SATA2 7200RPM 8MB 8.5MS NCQ Hard Drive

DVD Burner: BenQ DW1650 Black DVD+-RW 16X Dual Layer DVD Writer OEM

Floppy: SONY Black 1.44MB 3.5IN FLOPPY DRIVE

Case with PS: ASUS TM-230 mATX Mini Tower Case White 20/24 Pin 300W W/ Front USB & Audio

Total cost = $484.26 (Canadian)

Thanks for reading!

 

[Trifid]

Gaming and 3d moddelling not really. But assuming that minor video stuff is, movie clips than it will be fine.

 

[talldude123]

You might want a higher processor. AMD Sempron 2600 isn't that great, its the least expensive AMD processor out there.

If you can afford athlon, then go for it!

 

[Infinite]

Ya it's definitely not going to be used for gaming or 3d modeling. Just some website building/graphics/little if any video clip work.

 

[sailpog]

hmmm .why are you building you probably get a ready built pc for less with all the specs you want.try ebuyer.co.uk, its a uk site but some of the pcs are pretty **** cheap and going on what you have said you want in this pc would sute you well.

 

[cyrax]

It should be fine. A did some video editing on my 2.4GHz Celey, and it was ok. Not the fastest though, lagged a bit. But I heard Celerons are worse than Semprons. I also did websites and graphics, all were fine.