Need Help Summer Build

Status
Not open for further replies.
broadwater chip... ok. well i'll just wait for the conroe to come out before thinking about the cpu and motherboard.... what does everyone think aout my proposed powersupply and the 7600GT as a hold over till the dx10 cards come out... and of course the parts i proposed.


http://www.newegg.com/Product/Produ...N82E16811133154
Thermaltake Armor Series VA8000BWS Black

http://www.newegg.com/Product/Produ...N82E16817153028
Thermaltake W0093RU 500W Power Supply (not sure bout this...)

http://www.newegg.com/Product/Produ...N82E16820227047
OCZ Gold Series 2GB (2 x 1GB) 240-Pin DDR2

2 MAXTOR 250 GB HD's at 74.99

1 Samsung Optical Drive at 39.99
 
Bad links. Here's working ones.

Thermaltake Armor Series VA8000BWS Black
http://www.newegg.com/Product/Product.asp?item=N82E16811133154

Thermaltake W0093RU 500W Power Supply
http://www.newegg.com/Product/Product.asp?item=N82E16817153028.

OCZ Gold Series 2GB (2 x 1GB) 240-Pin DDR2
http://www.newegg.com/Product/Product.asp?item=N82E16820227047


I don't know much about power supplies. But I hear Antec is supposed to be really good. There is another thread right on the front page about power supplies. I recommend you check it out.

Also, what's the link to your hard drive?
 
yeah I would go with Antec...I don;t know if thermaltake PSUs are very good.

I have a 500 watt Antec Smartpower. I love it.
 
what do you think of two 250gb maxtor hd's. what would be the best quality / cost efficient solution for a 500gb or more storage capability? with performance obviously also a factor.
 
gurusan said:
dude....right now no motherboards support conroe.

Sorry but you are incorrect, there are a few mobos that support Conroe.

what do you think of two 250gb maxtor hd's. what would be the best quality / cost efficient solution for a 500gb or more storage capability? with performance obviously also a factor.

I wouldn't get Maxtor. Many people have had problems with them. I would look into getting WD or Seagate.
 
what mobo supports conroe. also what antec powersupply would be sufficient for this type of build? if in fact antec is the way to go?
 
Status
Not open for further replies.
Back
Top Bottom