meat_helmet
Daemon Poster
- Messages
- 1,119
- Location
- Sydney, Australia
My Specs:
Athlon 64 3500+ (venice)
Asrock 939 Dual SATA2 Mobo
Antec NeoHE 550W
Zalman 7700ALCu CPU fan
1 GB Geil PC3200
7900GT
So, i cant seem to get my cpu past 2.4Ghz, no matter which way i do it. I can get it to 2.4 with HTT=220, mult=11x, HTmult=4x, ram=200 and it seems stable. But i cant seem to push it any further, even if i lower the ram to 166 or 133. Disabled spread spectrum, set the memory timings about as slack as they will go and both 1T and 2T command rates.
I figue, if the HTT can be pushed to 220 with the ram still at 200, then it is probably not the ram limiting me.
Ive tryed taking the voltage a bit higher, would that just be it?? Or is there something else im missing??
Thanks.
Athlon 64 3500+ (venice)
Asrock 939 Dual SATA2 Mobo
Antec NeoHE 550W
Zalman 7700ALCu CPU fan
1 GB Geil PC3200
7900GT
So, i cant seem to get my cpu past 2.4Ghz, no matter which way i do it. I can get it to 2.4 with HTT=220, mult=11x, HTmult=4x, ram=200 and it seems stable. But i cant seem to push it any further, even if i lower the ram to 166 or 133. Disabled spread spectrum, set the memory timings about as slack as they will go and both 1T and 2T command rates.
I figue, if the HTT can be pushed to 220 with the ram still at 200, then it is probably not the ram limiting me.
Ive tryed taking the voltage a bit higher, would that just be it?? Or is there something else im missing??
Thanks.