Design of my case is coming along well at the moment I am working on the fan controller (I will be making my own as commercial ones don't meet my needs). I need to know the following:
How many fans can be hooked up to one connector on a PSU (Will I have problems if I hook up all 6 to one connector or do I need to connect them to separate connectors?).
I want to have a switch for each fan with two on positions one 5v and one 12v is this a good idea? Any switch recommendations (keeping in mind that I don't weld so I would need either one with wires coming out or screws to secure the wires.
And finally I want to know which HSF I should use for the CPU (Keeping in mind there will be air going into one side and out the top.
Thank you very much in advance for your advice.
How many fans can be hooked up to one connector on a PSU (Will I have problems if I hook up all 6 to one connector or do I need to connect them to separate connectors?).
I want to have a switch for each fan with two on positions one 5v and one 12v is this a good idea? Any switch recommendations (keeping in mind that I don't weld so I would need either one with wires coming out or screws to secure the wires.
And finally I want to know which HSF I should use for the CPU (Keeping in mind there will be air going into one side and out the top.
Thank you very much in advance for your advice.