LanLover 9400 :worklog

[NOGA]

Ya Im thinking about water cooling it and sticking a radtiator in there.

 

[Lord AnthraX]

spensive spensive! $$$$


the only thing I know about water cooling is that DC5 pumps are the best...lol go me !

 

[CrazeD]

I wouldn't stuff a radiator in there.. there's not enough air space and it wouldn't cool well. Radiators need a lot of air.

 

[Pepsiboy700]

It would be cool if you could hook a servo to the the 3 vents on the blower and depending on what lvl the fans are on depends how open they are and when the computer starts up it "revs" up. Lol stupid idea.

 

[NOGA]

Well I was just thinking abut the radiator idea. If would have the right amount of room to cool if I designed the blower around the radiator.

Ill have to see when I deside.

 

[joshd]

LOL!! that would be great!

~push power button~

warrrrm warrrm WAAARRRRRRRMMMMM

EDIT: make sure you put some nice lights inside that blower thingy. it would look schweet.

 

[NOGA]

Ya, im going to add some orange/uv leds

heres what Im going to add on the side to start the blower fan.

the piolet switch will be soooo cool.

 

[NOGA]

Update May 15 06

ok.....
Heres my update for what I did this weekend.

Painting.
I redid the front fan grate and other stuff but thats not interesting and would only chew up bandwidth.
Heres the Case 1/2painted, Hd cage, and 1/2 the side panel.

Before

after (the color looks off)

front with bondo (doesn't look good)

Continues

 

[NOGA]

this doesn't have to do with my mod, but I had extra time between painting so I tried it.
as you can see, I really, really screwed up the top panel of the first case
so I this is what I did to fix it!

One, cut a aluminum sheet that fit the area that was "bad"

then set up your station!

then, go to work!

after a while with the mouse sander

and more time with sander (still need to finish it up)

I didn't get as much done this weekend as I wish I had but, time is limited.
till next update.

 

[CrazeD]

No offence, but that last part looks really bad.

What you should have done, is put the aluminum you cut on the inside, then bondoed the top a little, sanded, painted.

Just wondering, how did you mess up that bad on the hole? What are you using to cut it, a dremel? If so, try a jigsaw. Then to mark the holes, put in a standerd fan grill upside down so the wires are inside the hole, and then mark the four mounting holes. Perfect fit.