Pretty happy

[Lord AnthraX]

Yeah So I asked my good freind PZEROFGH to help me OC...

I was using stock HSF, with Idle temps at about 36 C

He helped me get it up to 2.7, but then after priming I was hitting 51 C

I then rememberd I had a zalman 9550 Sitting around, So I installed it.

My Idle temp went to 26 C @ 2.5 GHz with voltages at 1.3


I Think I got a good OC'er, I dunno but Im so far very happy...

Cant wait to make this puppy roar

 

[thebleakness]

Lol, you just happened to "remember" that you had a very nice HSF lol, what did you do? forget about it before?

Wow, 2.5 with 1.3 vCORE? Thats very nice. And its all stable?

 

[Lord AnthraX]

yeah...this where I am

FSB freq. 230

LDT/FSB Freq ratio: Auto

LDT Bus Transfer Width - Down 16 up 16

CPU/FSB Freq. Ration -Auto

CPU VID startup Value- start up


CPU CORE VOLTAGE: 1.35

LDT BUS VOLTAGE: 1.22

CHIP SET VOLTAGE: 154

Dram Voltage 2.6

cpu Vid control- Auto


Temps are 26 C idle... all stable at 2.5 GHz...


But What I really want to do is run a memory divider (ddr366) But im not sure how...

My Memory needs alot of tweaking too...

DRAM freq. Auto

Command Per Clock- Auto

CAS latency control - 3.0

RAS to Cas Delay - Auto

Automin RAS active time Auto

Row Precharge Time Auto

Row cycle Time 07 Bus clocks

Row Refresh cyc time : Auto

Row to Row Delay: 02 Bus Clocks

Write recovery time- 02 Bus Clocks

Write to read delay - 02 Bus Clocks

Write to read delay- 03 Bus Clocks

Refresh Period- 3120 Cycles

Write CAS Latency- Auto

DRAM bank Interleave EnabledDRAM freq. Auto

Command Per Clock- Auto

CAS latency control - 3.0

RAS to Cas Delay - Auto

Automin RAS active time Auto

Row Precharge Time Auto

Row cycle Time 07 Bus clocks

Row Refresh cyc time : Auto

Row to Row Delay: 02 Bus Clocks

Write recovery time- 02 Bus Clocks

Write to read delay - 02 Bus Clocks

Write to read delay- 03 Bus Clocks

Refresh Period- 3120 Cycles

Write CAS Latency- Auto

DRAM bank Interleave Enabled


any Ideas?

 

[ulater6000]

You might be able to push your CPU to 2.8ghz if you increase the v-core

 

[Lord AnthraX]

not with what my memory is at....


Im still reading up on some memory guides...

 

[PZEROFGH]

Yeah but we're waiting for th eAS5 and whatnot to set in. And your welcome

 

[Lord AnthraX]

hey dude btw why did you ditch me? lol...I mean if you didnt feel like doing it you could of just told me I wouldnt have minded...


any way yeah....Sure Ulater I can go to 2.8 GHz Physically Iv been there already, but right now my memory is the problem, so once I finish up reading these guides (still pretty lost) Il look to tweak them...