Safe temps for my new system

Status
Not open for further replies.

DwayneDays

In Runtime
Messages
407
Ok im using speedfan to monitor my temp and so far these are my readings

temp 1 37
temp 2 42
temp 3 42
harddrive is at 30
and the other temp 1 at the bottom says 40
These should be lower shouldnt they? Anything I can do to get them lower?

Running a 3800 x2 radeon 1900 xt and a dfi lanparty board. The v-card has one of those zalman heatsinks on it as well
 
Use Everest Home Edition. It will give you better readings. Anything on full load under 50*c for your CPU is fine. Video card is good up to 65*C.
 
theyre pretty good, i have to say mine were double those for my cpu since i mounted the cpu fan wrong!!
 
Everything stock?

The cpu is eh, the video card is fine. And the chipset is fine also. Hdd is fine also too :D
 
mobo 40
cpu 36
north bridge 43
raptor hd 28

are these all normal temps? I thought id get a lower videocard temp from the heatsink :(
 
I'm a little confusedm you have both a North Bridge temp, AND a Motherboard temp?? I usualy only see a North Bridge temp or a Motherboard temp, not both... Unless you have an older processor? Strange... And where is the GPU temp with everest?
 
Status
Not open for further replies.
Back
Top Bottom