My Complete Build +pics

Status
Not open for further replies.

Shifty52

Baseband Member
Messages
23
Well after 4 days of assembling and dismantling, and re-assembling. It is complete. I am extreamly happy with the build and the components. I ran some tests and it seems to be able to stay between 28-35 degrees C between idle and load. I used 3dmark03 and it gave me 24340 points when I ran it. So without further ado, here's the pics.


cpu00.JPG

Front of the case.
cpu11.JPG

Picture with the flash turned on.
cpu22.JPG

No Flash, side shot
cpu33.JPG

All of the cables are routed behine the 3.5 bays, all except the round IDE cable, that one is off to the side as much as I can get it.
cpu44.JPG

I just like the fan.:)


Thanks to everyone for their help in choosing good parts and for the help with the actual build.
 
Whoopsy... That might help..:)

Specs:
ASPIRE X-Navigator Silver
DFI LANPARTY UT nF4 SLI-DR Expert
AMD Opteron 170
G.SKILL 2GB (2 x 1GB) 184-Pin DDR SDRAM DDR 500 (PC 4000)
XFX Geforce 7900GTX
FSP Group (Fortron Source) 600W All-In-One
Western Digital Raptor 74GB 10,000 SATA150
Western Digital Caviar 250GB 7200 SATA 3.0Gb/s
NEC 16X DVD±R
ZALMAN CNPS9500
 
Woah your hecka lucky! I was like, dang that Video card is huge. I like the lights, tell us how high you can OC that Opteron.
 
slick_tech15 said:
Woah your hecka lucky! I was like, dang that Video card is huge. I like the lights, tell us how high you can OC that Opteron.

The card is GIGANTIC.:) But runs like a dream. Low Temps as well. I'll break it in for a few weeks then work with OC'ing it. Will let ya know.
 
Status
Not open for further replies.
Back
Top Bottom