Hi all
I have a new system built and it all works fine apart from the Dual channel ram that i have. The problem is if i have the 2 identical sticks in the orange slots it reboots after a while. i have tried in the yellow slots too but same problem.
I have also tried one in yellow and one in orange and it is still unstable but not as bad. I then tried 1 stick in orange slot and seems to be stable.
So my pc doesnt like dual channel but apparently my MB can take it etc.
I have a
DFI LanParty UT NF4 Ultra-D (Socket 939) PCI-Express Motherboard
and
G.Skill 2GB DDR HZ PC4000 (2x1GB) CAS3 Dual Channel Kit
If you have any clues why i cant use dual channel i would be most appreciative.
I have a new system built and it all works fine apart from the Dual channel ram that i have. The problem is if i have the 2 identical sticks in the orange slots it reboots after a while. i have tried in the yellow slots too but same problem.
I have also tried one in yellow and one in orange and it is still unstable but not as bad. I then tried 1 stick in orange slot and seems to be stable.
So my pc doesnt like dual channel but apparently my MB can take it etc.
I have a
DFI LanParty UT NF4 Ultra-D (Socket 939) PCI-Express Motherboard
and
G.Skill 2GB DDR HZ PC4000 (2x1GB) CAS3 Dual Channel Kit
If you have any clues why i cant use dual channel i would be most appreciative.