booting XP problem

Status
Not open for further replies.

worrwhorre

Baseband Member
Messages
99
i hadd an extra 150 gb on my hard drive and i cecided to install XP Media Center edition on it. I created a partition E and went through with installing. I then got a message during the XP installation asking for my CD key, but i didn't have one because i thought it asked for it lated after everything was installed. so i restarted and deleted the partition i just made hoping i can just boot off of C, but that didnt work. now when i boot i get this message:

"Windows could not start because of a computer disck hardware configuration problem.
Could not read from the selected boot disk. Check the boot path and disk hardware.
Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information."

what does this mean and what can i do to fix it?
 
XP Repair install

Please read carefully and make sure you followed the warning links before initiating the Repair Install. You can print a text version for reference. repair.txt

Boot the computer using the XP CD. You may need to change the boot order in the system BIOS so the CD boots before the hard drive. Check your system documentation for steps to access the BIOS and change the boot order.
When you see the "Welcome To Setup" screen, you will see the options below
This portion of the Setup program prepares Microsoft
Windows XP to run on your computer:

To setup Windows XP now, press ENTER.

To repair a Windows XP installation using Recovery Console, press R.

To quit Setup without installing Windows XP, press F3.

Press Enter to start the Windows Setup. do not choose "To repair a Windows XP installation using the Recovery Console, press R", (you Do Not want to load Recovery Console). I repeat, do not choose "To repair a Windows XP installation using the Recovery Console, press R".
Accept the License Agreement and Windows will search for existing Windows installations.
Select the XP installation you want to repair from the list and press R to start the repair. If Repair is not one of the options, END setup. After the reboot read Warning#2!
Setup will copy the necessary files to the hard drive and reboot. Do not press any key to boot from CD when the message appears. Setup will continue as if it were doing a clean install, but your applications and settings will remain intact.
 
Warez Monster said:
XP Repair install

Please read carefully and make sure you followed the warning links before initiating the Repair Install. You can print a text version for reference. repair.txt

Boot the computer using the XP CD. You may need to change the boot order in the system BIOS so the CD boots before the hard drive. Check your system documentation for steps to access the BIOS and change the boot order.
When you see the "Welcome To Setup" screen, you will see the options below
This portion of the Setup program prepares Microsoft
Windows XP to run on your computer:

To setup Windows XP now, press ENTER.

To repair a Windows XP installation using Recovery Console, press R.

To quit Setup without installing Windows XP, press F3.

Press Enter to start the Windows Setup. do not choose "To repair a Windows XP installation using the Recovery Console, press R", (you Do Not want to load Recovery Console). I repeat, do not choose "To repair a Windows XP installation using the Recovery Console, press R".
Accept the License Agreement and Windows will search for existing Windows installations.
Select the XP installation you want to repair from the list and press R to start the repair. If Repair is not one of the options, END setup. After the reboot read Warning#2!
Setup will copy the necessary files to the hard drive and reboot. Do not press any key to boot from CD when the message appears. Setup will continue as if it were doing a clean install, but your applications and settings will remain intact.

thanks but i got it fixed using jeremy's link
 
Status
Not open for further replies.
Back
Top Bottom