Sveltegirl
Solid State Member
- Messages
- 6
I broke the retention clip on the memory slot and now my computer just boots and hangs. No start up screen, zippo. After much research, I realized that little clip probably affected the motherboard. I'm not in a position right now to buy a new mobo and it's essential parts, I just want to replace the board I'm using for now. Here are the specs:
ASUS CUV266
CPU Support
• Supports Socket 370 processors
• Supports Intel Pentium III processors from 650 MHz to 1.0 Hz
• Supports Intel Celeron processors from 333 MHz to 1.1 GHz
Chipset
• VIA VT8633 chipset
• Supports AGP 4X/2X Pro
• UltraDMA/100/66/33 IDE Controller
Memory
• 3 x 184-pin DIMM sockets
• Supports up to 3 GB of DDR PC1600/PC2100 SDRAM
Is there anyone who can point me in the direction where I can purchase one or at the very least, a reasonable facsimile? If you need more specs let me know. Thanks.
ASUS CUV266
CPU Support
• Supports Socket 370 processors
• Supports Intel Pentium III processors from 650 MHz to 1.0 Hz
• Supports Intel Celeron processors from 333 MHz to 1.1 GHz
Chipset
• VIA VT8633 chipset
• Supports AGP 4X/2X Pro
• UltraDMA/100/66/33 IDE Controller
Memory
• 3 x 184-pin DIMM sockets
• Supports up to 3 GB of DDR PC1600/PC2100 SDRAM
Is there anyone who can point me in the direction where I can purchase one or at the very least, a reasonable facsimile? If you need more specs let me know. Thanks.