X2 4800+ OC Results

Status
Not open for further replies.

WWS

In Runtime
Messages
274
I have oc'ed my cpu and got up to 2.75GHz. My FSB is at 250MHz. I used a multiplier of 11.0 and my memory is at 162 MHz.
All the above info is from cpuz the program.

I ran 3DMark06 and got a result of 4843.

If I try and increase anything my system becomes unstable.

For those that are experienced at OCing, is there anything else that I could try or may have missed that could possible get me higher speeds??
 
what temperature is your CPU at, idle and under load? have you tried running SuperPI and Prime 95 to test stability also?
 
Vdimm is currenly at 2.7V
Vcore is at 1.40V
Idle temp is at 34-35 DegC
Load temp is at 37-42 DegC
LTD is at 200MHz

I am not exactly sure what LTD is but if I am thinking correctly I have choices of 133, 166, 200. and it is set at 200.

I have tried increasing the Vcore up but no results system will not boot windows beyond these settings.

I have not run any stability programs like prime95 I have only been playing games at these settings. Is this good enough or should I run the stability programs?
 
I will try lowering the LTD to 166MHz and go from there. Anyone else have any other insite?
 
Status
Not open for further replies.
Back
Top Bottom