gurusan
Golden Master
- Messages
- 6,562
- Location
- Portland, OR
So I have my 3200 OCed from 2.0 to 2.4
240 fsb
5x HTT
1.5 vcore
2.7 ram
166 mem divider (ram at 200)
1.6 chipset
When I go above 240 it complains about not being able to read some file for booting windows....and sometimes it starts booting windows, then flashes a blue screen and reboots.
Does this mean this is the farthest I can take my CPU?
Temps are very reasonable....about 24C idle, never above 35 full load.
I've tried going to 2.5 with vcore at 1.55 and mem at 150 divider with no success....windows won't boot.
Suggestions? I don't think the ram is holding me back because it's always around 200mhz...and previously I had my system OC'd at 220 with 1.425 vcore, 1:1 divider (ram at 220mhz) no problems.
240 fsb
5x HTT
1.5 vcore
2.7 ram
166 mem divider (ram at 200)
1.6 chipset
When I go above 240 it complains about not being able to read some file for booting windows....and sometimes it starts booting windows, then flashes a blue screen and reboots.
Does this mean this is the farthest I can take my CPU?
Temps are very reasonable....about 24C idle, never above 35 full load.
I've tried going to 2.5 with vcore at 1.55 and mem at 150 divider with no success....windows won't boot.
Suggestions? I don't think the ram is holding me back because it's always around 200mhz...and previously I had my system OC'd at 220 with 1.425 vcore, 1:1 divider (ram at 220mhz) no problems.