Got my 2.66P4 up to 3.14 ghz and still stable!

Status
Not open for further replies.
i bet you'll get that up to 3.4GHz... maybe 3.8GHz with upgraded cooling. those prescott's LOVE to overclock...and they love to heat up, so keep a very careful eye on the temps once you start bumping up the voltage kinda high.
 
I got my 2.60ghz P4 Northy to 3.7ghz with my Big Typhoon cooler. It was Prime95 stable for 4 1/2 hours, then it errored out.
 
WOOT!!! it ran the hole night!!!!!! 13 hours

perfect im going to bump it um more, tell you guys later :)
 
B.e.a.utiful! I had my Althon clocked @ 2.5GHz with 1.35V, it errored out after around 2 1/2 hours lol.
 
lol its runnng fine with out having to up the voltage right not so WOOT!

i added a 120mm in the front drive bays (there grated, lets sire though) instead of the 80mm i hade there, droped my idle temp 1C and running 2 C :)
 
you can probably cut those grates off to help improve airflow. i did that with my case and it definitely allowed more air to flow and cut down on some noise too.
 
Status
Not open for further replies.
Back
Top Bottom