Computer Won't Post

Status
Not open for further replies.
No problem. Take out the battery, move the jumpers from 1-2 to 2-3 turn on the computer, then turn it off replace the jumpers and then the battery.
 
reggie_da_man said:
No problem. Take out the battery, move the jumpers from 1-2 to 2-3 turn on the computer, then turn it off replace the jumpers and then the battery.
Click to expand...
no luck with that
 
Sometimes the CMOS just gets screwed up and needs to be reset. Now I'm starting to think that this motherboard is ****ed.
 
David...
I checked your manual..... you do not have a 4pin connector for the Cpu, so i guess that is provided thru the main power connector.
Clock jumpers...... where are the settings? Did you try changing them? Double check they agree with each other.
Ex. JP1A1........ 1&2, JP1B1..... 3&4 for 100Mhz.
* verify they are snug.
Verify your memory jumpers are correct.
 
JKnPA said:
David...
I checked your manual..... you do not have a 4pin connector for the Cpu, so i guess that is provided thru the main power connector.
Clock jumpers...... where are the settings? Did you try changing them? Double check they agree with each other.
Ex. JP1A1........ 1&2, JP1B1..... 3&4 for 100Mhz.
* verify they are snug.
Verify your memory jumpers are correct.
Click to expand...
whats cpu clock mean?
 
Processor clock frequency....... see pg.7 @ jumpers.
Verify and re-seat your memory card.
* they are hard to seat......... carefully seat them all the way, tabs should click up.
 
Status
Not open for further replies.

Similar threads

R
gigabyte GA-H170M-D3H boot loop power issues , and no display
Replies
5
Views
1K
ripo66
R
M
Upgrading Old Computer- Please help
Replies
2
Views
728
PP Mguire
PP Mguire
R
Suddenly there is no display on the computer
Replies
8
Views
894
Flowace
Flowace
O
  • Locked
New PC Build DRAM light with no post
Replies
2
Views
2K
PP Mguire
PP Mguire
S
I’ll never dissassmble another LT again
Replies
0
Views
793
stevethebrain
S
Back
Top Bottom