3gb too much?

Status
Not open for further replies.
if you are running a 32-bit OS, your limit is:
2 ^ 32 = 4294967296 possible addresses (1 address = 1 byte of data)
4294967296 bytes = 4 GB

if you are running a 64-bit Os, your limit is:
2 ^ 64 = 18446744073709551616 addresses
18446744073709551616 bytes =
17179869184 GB
or 16 Petabytes
 
You would have to check 3 things. The motherboard limit, the CPU limit and the OS limit.

Regular desktop motherboards only go up to 3, 4 or 8GB of RAM. The 32bit CPU's go up to 64GB using 36bit addressing method, I believe, but not entirely sure.
 
"besides, with 3gb you won't be able to run in dual channel which will decrease performance also"

Why can't you run 2x512mb and 2x1gb in dual channel with 4 slots
 
many motherboards won't run in dual-channel like that... a.k.a. dual dual channel lol. check your manual or do some googling to find out for sure.

...just trying to bring up all the possible scenarios
 
My bios shows that my ram is running "dual channel interleaved" and I have 3Gb in the configuration he's asking about.
Slot 1: 1Gb
Slot 2: 512Mb
Slot 3: 1Gb
Slot 4: 512Mb
 
The G5 Quad supports up to 16GB of RAM, it will cost you $7100 for non ECC and $10300 for ECC, and thats just the cost of the RAM.
 
Some motherboards are picky about what ram they take and allow dual-channel operation. My MSI K8N Neo4-F starts downclocking stuff when you get 4 sticks of 2-sided memory in them.

Ryan
 
useful info....thanks. As long as were on the subject , I run 2x1gb ram and when I put them in slots 1 and 3 (wich is what everyone tells me to put them in) it runs in single and if I put them in slots 1 an 2 it says its running in dual. CPUz is what I am looking at to see if its in dual or single. sort of goes against what I have been told but I leave them in 1 and 2 so cpuz says dual. any opinions on this?
 
Status
Not open for further replies.
Back
Top Bottom