Techist - Tech Forum - View Single Post - DVD Drive not working after new harddrive installed

Click Here to Login
View Single Post
Old 01-18-2006, 06:06 PM   #3 (permalink)
RicoDirenzo
Master Techie
 
RicoDirenzo's Avatar
 
Join Date: May 2005
Posts: 2,102
Default

First, try not using cable select. jumper the DVDrw as the master at the end of the IDE cable and the other as slave. Make sure they are connected to IDE secondary channel and use Ultra DMA 80 wire cable. If it still fails, go into device manager from system in control panal and find the secondary IDE channel and delete it. Don't worry, after you reboot the system will find the channel and rename the dvd drives. If that doesn't work we're are going to have to remove the upper and lower filters in the registry but not yet. Try that first an see what happens.
__________________
Noli Nothis Permittere Te Terere!!
EVGA 680i, Dual EVGA 8800GT'S (650/950), 4 gigs OCZ DDR2 1066, Intel Q9450 at 3.8 Ghz, Koolance Water Cooled, Dual Plextor16x DL DVD+/-RW. Dual WD 250gb 16mb Cache Sata 3.0. 3DMark06 score = 19,168.
RicoDirenzo is offline  
 


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 12:57 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.