CrAzY_GaMeR_07
Daemon Poster
- Messages
- 1,243
- Location
- ba
I added a HDD to my p3 server build today. (the only HD, setup in IDE0 as Master).
When I start the system, I hear 2 beeps and message:
"CMOS Date/Time Not Set
Press F1 to Run SETUP"
when I enter setup and try to change any settings, and save then restart, same things come up.
Also, every boot it counts the RAM everytime which takes so long.
It does show HD and CD in bios correctly.
Things I Have Tried:
I have tried 2 diffrent hard drives, same thing.
Replace Cmos Battery
Reset Cmos
Reset Default setting in Bios
Thanks for any suggestions.
~Joe
When I start the system, I hear 2 beeps and message:
"CMOS Date/Time Not Set
Press F1 to Run SETUP"
when I enter setup and try to change any settings, and save then restart, same things come up.
Also, every boot it counts the RAM everytime which takes so long.
It does show HD and CD in bios correctly.
Things I Have Tried:
I have tried 2 diffrent hard drives, same thing.
Replace Cmos Battery
Reset Cmos
Reset Default setting in Bios
Thanks for any suggestions.
~Joe