Overclock RAM Question

Status
Not open for further replies.

Smitty090

Baseband Member
Messages
59
Hi again...
I just noticed this when I went to check on my CPU Temp..
I (thought) I set my 2048MB RAM to timings 2-3-2-5 however this screen shot makes me wonder if I set the Wrong place?

According to this my Chipset is at the exact settings I *thought* I had my RAM at.
Is it possible I was setting the wrong spot and I havent even touched my OCZ Ram?

Thanks in advance.
 

Attachments

  • overclock.jpg
    35.9 KB · Views: 38
I assume it's reading your RAM clocks at stock timing. You should download CPU-Z and get a shot of the CPU, Memory, and SPD tab
 
Yeah I just noticed that.
I guess I posted a question before thinking a bit more.

The timings and speeds in their as well as the SPD tab on CPUz are showing the RAM stock timings.

Here is CPUz shots. I am about to start testing processor while I go to bed. How do you think it looks? Any tweaks I should make?
 

Attachments

  • cpuz1.jpg
    54.6 KB · Views: 35
your timings are at 2.5-4-4-7, those are a lot looser than what you were saying you were trying earlier.

If your CPU doesnt pass test you definitely need to up the vcore a little
 
Yeah, I upped them and tried to move from 240 fsb to 250. Puter didnt like that though so I dropped it back to 240.
Runs perfectly stable all night testing at 240fsb & 2.5-4-4-7

Edit: Have tested 240fsb and 2-3-2-5 and all is stable as can be.

Just cant seem to get any higher than that.


Thanks,
Smitty
 
Status
Not open for further replies.
Back
Top Bottom