boomstick666
Daemon Poster
- Messages
- 743
hi. im a noob about all.. this. i just built my 1st pc and its up and running but im not sure bios memory settings r right..
im on A64 x2 4800+, OCZ Titanium (not gold, not platinum) DDR400 2x1G 2-3-2-5, 7800GTX512 @ 602/1793, BIOS 6/23/05
it plays all the games well but i see some instability. and i think its the RAM causing it.
but im not sure whats not right ...so i need some help here.
and also i wanted to find out the CPU limit and RAM limit. so i tried something according to this:
http://www.dfi-street.com/forum/showpost.php?p=203167&postcount=3
and also i set the RAM setting on bios according to this:
http://www.dfi-street.com/forum/showpost.php?p=203179&postcount=4
and i found out i can only make HTT/FSB up to 210 for memory at x5 LDT multi. (gets errors when it goes past 213 on memtest)
but i can get to (233x5) 2.8Ghz for cpu.
do i have to make LDT multi to 3x or 4x in order to get more than 210?
or loosen the ram timing? (but i dunno which one to make change...)
and also this ocz ram is optimized at stock 200mhz so im not sure how much this ramm can take....so if the ram cant handle much, do i have to use the divider?
is there any downside using divider? since my cpu stays low temp, i wanted OC cpu more.
and my temperature is CPU 23~35c, System 42~55c, Chipset 43~55c. (start up ~ full load)
Is this normal...right?
if u see anything wrong w this settings pls post a reply...thx for ur help.
im on A64 x2 4800+, OCZ Titanium (not gold, not platinum) DDR400 2x1G 2-3-2-5, 7800GTX512 @ 602/1793, BIOS 6/23/05
it plays all the games well but i see some instability. and i think its the RAM causing it.
but im not sure whats not right ...so i need some help here.
and also i wanted to find out the CPU limit and RAM limit. so i tried something according to this:
http://www.dfi-street.com/forum/showpost.php?p=203167&postcount=3
and also i set the RAM setting on bios according to this:
http://www.dfi-street.com/forum/showpost.php?p=203179&postcount=4
and i found out i can only make HTT/FSB up to 210 for memory at x5 LDT multi. (gets errors when it goes past 213 on memtest)
but i can get to (233x5) 2.8Ghz for cpu.
do i have to make LDT multi to 3x or 4x in order to get more than 210?
or loosen the ram timing? (but i dunno which one to make change...)
and also this ocz ram is optimized at stock 200mhz so im not sure how much this ramm can take....so if the ram cant handle much, do i have to use the divider?
is there any downside using divider? since my cpu stays low temp, i wanted OC cpu more.
and my temperature is CPU 23~35c, System 42~55c, Chipset 43~55c. (start up ~ full load)
Is this normal...right?
if u see anything wrong w this settings pls post a reply...thx for ur help.
