Criticize My PSU

Status
Not open for further replies.
Set your multimeter to read 12v current and then attached it to a 12v connection coming from your PSU...not hard, however make sure you don't touch any PCBs with it or they will short out and die on you
 
Well I ran accross a link on the link you posted earlier gaara, it says a I need a 24pin PSU for DFI NF4 boards... Not a 20-24pin adapter, a native 24pin PSU. So it looks like I have to upgrade my PSU now :(. I don't really want to because none of the good ones have good cable management... What should I do now?

Also I can seem to figure this testing thing out, I have my voltmeter set to 20amps DC Current, and I put the red to the red wire on one of my 12v connections, and the black to the black closest to the red. It shut my computer down... All is good though, thank god!
 
I'd say maybe keep the psu and see if it will actually work on the board, if not, get an antec smartpower or fortron source :p
 
Status
Not open for further replies.
Back
Top Bottom